IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i19p5094-d421829.html
   My bibliography  Save this article

Tribo-Brake Characteristics between Brake Disc and Brake Shoe during Emergency Braking of Deep Coal Mine Hoist with the High Speed and Heavy Load

Author

Listed:
  • Dagang Wang

    (School of Mechatronic Engineering, China University of Mining and Technology, Daxue Road #1, Xuzhou 221116, China)

  • Ruixin Wang

    (School of Mechatronic Engineering, China University of Mining and Technology, Daxue Road #1, Xuzhou 221116, China)

  • Tong Heng

    (School of Mechatronic Engineering, China University of Mining and Technology, Daxue Road #1, Xuzhou 221116, China)

  • Guozheng Xie

    (School of Mechatronic Engineering, China University of Mining and Technology, Daxue Road #1, Xuzhou 221116, China)

  • Dekun Zhang

    (School of Mechatronic Engineering, China University of Mining and Technology, Daxue Road #1, Xuzhou 221116, China)

Abstract

The friction wear and thermal fatigue cracking of the brake shoe and friction-induced self-excited vibration (frictional flutter) of the disc brake can easily occur during emergency braking of a deep coal mine hoist with at high speed and with a heavy load. Therefore, tribo-brake characteristics between the brake disc and brake shoe during emergency braking of a deep coal mine hoist are investigated in the present study. Scaled parameters of the disc brake of a deep coal mine hoist are determined by employing the similarity principle. Friction tests between friction disc and brake shoe are carried out to obtain the coefficient of friction in the case of high speed and large specific pressure between the friction disc and brake shoe. Coupled thermo-mechanical finite element analyses of the brake disc and brake shoe are established to investigate temperature and stress fields of the brake disc and brake shoe during emergency braking, which is validated by the engineering failure case. Effects of braking parameters on flutter characteristics between the brake disc and brake shoe are explored by employing a double-degrees-of-freedom vibration mechanism model. The results show that the maximum temperature, equivalent Von Mises stress and contact pressure are all located at the average friction radii of contact surfaces of the brake disc and brake shoe during emergency braking. The cage crashing accident in the case of high speed and heavy load in a typical coal mine shows crack marks and discontinuous burn marks at central locations of brake shoe and brake disc surfaces, respectively, which indicates frictional flutter characteristics between brake disc and brake shoe. During emergency braking, flutter time duration decreases with increasing initial braking speed and damping parameter; the flutter amplitude and frequency of the disc brake increases with increasing normal braking load and stiffness, respectively.

Suggested Citation

  • Dagang Wang & Ruixin Wang & Tong Heng & Guozheng Xie & Dekun Zhang, 2020. "Tribo-Brake Characteristics between Brake Disc and Brake Shoe during Emergency Braking of Deep Coal Mine Hoist with the High Speed and Heavy Load," Energies, MDPI, vol. 13(19), pages 1-23, September.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:19:p:5094-:d:421829
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/19/5094/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/19/5094/
    Download Restriction: no
    ---><---

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Jacek Kukulski & Andrzej Wolff & Sławomir Walczak, 2023. "Selected Simulation and Experimental Studies of the Heat Transfer Process in the Railway Disc Brake in High-Speed Trains," Energies, MDPI, vol. 16(11), pages 1-26, June.
    2. Florin Dumitru Popescu & Sorin Mihai Radu & Andrei Andraș & Ildiko Brînaș, 2021. "Numerical Modeling of Mine Hoist Disc Brake Temperature for Safer Operation," Sustainability, MDPI, vol. 13(5), pages 1-20, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:19:p:5094-:d:421829. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.