IDEAS home Printed from https://ideas.repec.org/a/gam/jcltec/v4y2022i2p28-476d818282.html
   My bibliography  Save this article

Planning a Notable CCS Pilot-Scale Project: A Case Study in France, Paris Basin—Ile-de-France

Author

Listed:
  • Fernanda M. L. Veloso

    (French Geological Survey (Bureau de Recherche Géologique et Minière—BRGM), 3 Avenue Claude Guillemin, CEDEX 2, 45060 Orléans, France)

  • Isaline Gravaud

    (French Geological Survey (Bureau de Recherche Géologique et Minière—BRGM), 3 Avenue Claude Guillemin, CEDEX 2, 45060 Orléans, France)

  • Frédéric A. Mathurin

    (French Geological Survey (Bureau de Recherche Géologique et Minière—BRGM), 3 Avenue Claude Guillemin, CEDEX 2, 45060 Orléans, France)

  • Sabrine Ben Rhouma

    (French Geological Survey (Bureau de Recherche Géologique et Minière—BRGM), 3 Avenue Claude Guillemin, CEDEX 2, 45060 Orléans, France)

Abstract

Few commercial-scale carbon capture and storage (CCS) projects are currently operating in the world, with almost all in the USA and China. Despite a high number of CCS pilot-scale projects achieved in Europe, only two commercial-scale projects are operating today. The goal of this study is to present a case study in France to select a promising location to deploy a notable CCS pilot-scale project based on a multicriteria regional-scale approach. The methodology applied in this case study describes and assesses different aspects involved in CCS technology at the regional scale, and then an evaluation of economic key performance indicators (KPI) of CCS is carried out. The assessment at the regional scale gives an overview of where CCS could be applied, when CCS could be deployed and how to launch CCS considering the needs and concerns of stakeholders in the region. Technical aspects were mapped, such as the location of irreducible CO 2 sources and long-lasting emissions and the location of storage resources and existing potential transport infrastructures. We identified the waste-to-energy and chemical sectors as the main CO 2 sources in the region. An economic analysis of a hypothetical scenario of CCS deployment was elaborated considering three of the higher emitters in the region. A CCS scenario in the Paris Basin region with a deployment between 2027 and 2050 indicates a low CO 2 cost per ton avoided between 43 EUR/t and 70 EUR/t for a cumulated total of 25 Mt and 16 Mt, respectively, of CO 2 captured and stored for 26 years, including 7.7 Mt of CO 2 from biomass (potential negative emissions). Storage maturity and availability of the resource are the most uncertain parameters of the scenario, although they are the key elements to push investment in capture facilities and transport. Geological storage pilot projects are mandatory to prove storage resource and should be located in strategic locations close to potential CO 2 sources in case of confirmation of proven resources. Well-perceived pilot-scale projects are the first step to start engaging in deciding and investing in commercial-scale CCS projects.

Suggested Citation

  • Fernanda M. L. Veloso & Isaline Gravaud & Frédéric A. Mathurin & Sabrine Ben Rhouma, 2022. "Planning a Notable CCS Pilot-Scale Project: A Case Study in France, Paris Basin—Ile-de-France," Clean Technol., MDPI, vol. 4(2), pages 1-19, May.
  • Handle: RePEc:gam:jcltec:v:4:y:2022:i:2:p:28-476:d:818282
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2571-8797/4/2/28/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2571-8797/4/2/28/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jcltec:v:4:y:2022:i:2:p:28-476:d:818282. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.