IDEAS home Printed from https://ideas.repec.org/a/caa/jnlrae/v63y2017i1id82-2015-rae.html
   My bibliography  Save this article

Analysis of production parameters of single-lap bonds adhesive bonded with composites based on aluminium filler

Author

Listed:
  • Miroslav Müller

    (Department of Material Science and Manufacturing Technology, Faculty of Engineering, Czech University of Life Sciences Prague, Czech Republic)

Abstract

In the area of bonding of sheets of metals, mainly in construction of transport and agricultural machines, single-lap bonds are used. In manufacturing corporations focused on bonding of the metal sheets the technologies such as riveting, welding and adhesive bonding are particularly used. These methods are frequently combined. The aim of the research was the evaluation of lap length of alloy AlCu4Mg adhesively bonded using two component epoxy adhesive, which is commonly used in construction of machines and its modification based in addition of filler in form of aluminium microparticles. The secondary aim of the research was to ascertain the influence of microparticle volume of aluminium filler on mechanical properties of polymer particle composite. Strength of adhesively bonded joint depends on the thickness of the bonded material. Strength of the adhesively bonded joint is dependent on the lapping length of adhesively bonded material. The highest values of strength of adhesively bonded joint were reached with the coefficient of the proportional length 0.27 ± 0.01. The assumption about negative effect of filler on tensile strength during the experiments was not confirmed.

Suggested Citation

  • Miroslav Müller, 2017. "Analysis of production parameters of single-lap bonds adhesive bonded with composites based on aluminium filler," Research in Agricultural Engineering, Czech Academy of Agricultural Sciences, vol. 63(1), pages 36-44.
    • Handle: RePEc:caa:jnlrae:v:63:y:2017:i:1:id:82-2015-rae
    DOI: 10.17221/82/2015-RAE
    as

    Download full text from publisher

    File URL: http://rae.agriculturejournals.cz/doi/10.17221/82/2015-RAE.html
    Download Restriction: free of charge
    File URL: http://rae.agriculturejournals.cz/doi/10.17221/82/2015-RAE.pdf
    Download Restriction: free of charge
    File URL: https://libkey.io/10.17221/82/2015-RAE?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. D. Herák & M. Műller & J. Karanský & O. Dajbych & S. Simanjuntak, 2009. "Bearing capacity and corrosion weight losses of the bonded metal joints in the conditions of Indonesia, North Sumatra province," Research in Agricultural Engineering, Czech Academy of Agricultural Sciences, vol. 55(3), pages 94-100.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. P. Valášek & M. Müller & A. Proshlyakov, 2012. "Effect of sedimentation on the final hardness of polymeric particle composites," Research in Agricultural Engineering, Czech Academy of Agricultural Sciences, vol. 58(3), pages 92-98.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:caa:jnlrae:v:63:y:2017:i:1:id:82-2015-rae. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Ivo Andrle (email available below). General contact details of provider: https://www.cazv.cz/en/home/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.