IDEAS home Printed from https://ideas.repec.org/a/caa/jnlrae/v62y2016i3id32-2015-rae.html
   My bibliography  Save this article

Mechanical properties of composite material reinforced with textile waste from the process of tyres recycling

Author

Listed:
  • M. Müller

    (Department of Material Science and Manufacturing Technology, Faculty of Engineering, Czech University of Life Sciences Prague, Prague, Czech Republic)

Abstract

The paper deals with the polymeric fibre composite with the reinforcement on the basis of the waste from the process of the tyres recycling. The aim of the research was the use of the material of cleaned textile waste from the process of the tyres recycling. The secondary waste raw material was used as filler in the composite. The subject of performed experiments was the polymeric composite, whose continuous phase was in a form of a two-component epoxy adhesive (GlueEpox Rapid) and a discontinuous phase in a form of microfibers from the process of tyres recycling. The experiments results proved that the composite materials based on the textile waste from the process of the tyres recycling reached an increase of an impact strength, a tensile lap-shear strength and an elongation of the adhesive bond (to 2.5% vol.). The textile microfiller has a negative influence on the tensile strength and elongation of adhesives.

Suggested Citation

  • M. Müller, 2016. "Mechanical properties of composite material reinforced with textile waste from the process of tyres recycling," Research in Agricultural Engineering, Czech Academy of Agricultural Sciences, vol. 62(3), pages 99-105.
    • Handle: RePEc:caa:jnlrae:v:62:y:2016:i:3:id:32-2015-rae
    DOI: 10.17221/32/2015-RAE
    as

    Download full text from publisher

    File URL: http://rae.agriculturejournals.cz/doi/10.17221/32/2015-RAE.html
    Download Restriction: free of charge
    File URL: http://rae.agriculturejournals.cz/doi/10.17221/32/2015-RAE.pdf
    Download Restriction: free of charge
    File URL: https://libkey.io/10.17221/32/2015-RAE?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. P. Valášek & J. Kejval & M. Müller, 2014. "Epoxy resin filled with primary and secondary raw material - useable in agriculture," Research in Agricultural Engineering, Czech Academy of Agricultural Sciences, vol. 60(4), pages 165-171.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.

      Corrections

      All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:caa:jnlrae:v:62:y:2016:i:3:id:32-2015-rae. See general information about how to correct material in RePEc.

      If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

      If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

      If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

      For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Ivo Andrle (email available below). General contact details of provider: https://www.cazv.cz/en/home/ .

      Please note that corrections may take a couple of weeks to filter through the various RePEc services.

      IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.