IDEAS home Printed from https://ideas.repec.org/a/caa/jnlrae/v53y2007i4id1956-rae.html
   My bibliography  Save this article

Investigating the pumping process of a resonance-vibrating pump for medium-depth boreholes

Author

Listed:
  • I.A. Loukanov

    (Department of Mechanical Engineering, University of Botswana, Gaborone, Botswana)

Abstract

This paper deals with the pumping process of a resonance-vibrating pump, which utilizes the resonance vibrations of one degree-of-freedom oscillating system. The pump is powered by a mechanical shaker consisting of two counter rotating offset masses and operating in resonance. The study investigates the nature of the pumping process and conditions required to achieve pumping action. Equations for the flow rate, pressure developed at ground level or any height above it, the pump efficiency, and the power delivered by the shaker are derived. The analysis of the pumping process revealed that the flow rate of the pump may be maximized either by increasing the acceleration imparted on the oscillating system, and/or by reducing the resonance frequency. It was found that the pressure developed by the pump is independent of the depth of pumping, provided that the same acceleration is imparted, and its efficiency may be increased either by reducing the resonance frequency and/or by increasing the depth of pumping. The preliminary test results about the flow rate and pressure developed at ground level appeared to be close to the values predicted by the proposed theory. Based on the analysis of the theoretical and experimental findings it is concluded that the equations derived in this study may be employed in designing resonance vibrating pumps for a desirable flow rate, pressure, and efficiency in pumping water from a specified depth.

Suggested Citation

  • I.A. Loukanov, 2007. "Investigating the pumping process of a resonance-vibrating pump for medium-depth boreholes," Research in Agricultural Engineering, Czech Academy of Agricultural Sciences, vol. 53(4), pages 172-181.
  • Handle: RePEc:caa:jnlrae:v:53:y:2007:i:4:id:1956-rae
    DOI: 10.17221/1956-RAE
    as

    Download full text from publisher

    File URL: http://rae.agriculturejournals.cz/doi/10.17221/1956-RAE.html
    Download Restriction: free of charge

    File URL: http://rae.agriculturejournals.cz/doi/10.17221/1956-RAE.pdf
    Download Restriction: free of charge

    File URL: https://libkey.io/10.17221/1956-RAE?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:caa:jnlrae:v:53:y:2007:i:4:id:1956-rae. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Ivo Andrle (email available below). General contact details of provider: https://www.cazv.cz/en/home/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.