Content
2022
- 15-19 Continuing Airworthiness Management—Organization and AMP Requirements
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 17-39 Dynamic Probabilistic Risk Assessment
In: Online Probabilistic Risk Assessment of Complex Marine Systems
by Tarannom Parhizkar & Ingrid B. Utne & Jan-Erik Vinnem - 21-29 Instructions for Continuing Airworthiness (ICA)
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 21-31 Digital Business Models and the Rail Transport System
In: Digital Safety in Railway Transport—Aspects of Management and Technology
by Marek Jabłoński - 21-49 Integrated Reliability and Risk Assessments of Nuclear Facilities
In: Reliability and Maintainability Assessment of Industrial Systems
by Vanderley Vasconcelos & Graiciany Paula Barros & Antônio Carlos Lopes da Costa & Wellington Antonio Soares - 25-30 Driving the Introduction of Digital Technologies to Enhance the Maintenance Management Process and Framework
In: Digital Maintenance Management
by Adolfo Crespo Márquez - 31-39 The Definition of the Asset Data Model
In: Digital Maintenance Management
by Adolfo Crespo Márquez - 31-51 Software Reliability Growth Models Incorporating Software Project/Application’s Characteristics as a Power Function with Change Point
In: Optimization Models in Software Reliability
by Shinji Inoue & Abhishek Tandon & Prarna Mehta - 33-46 AMP Content and Maintenance Planning Document (MPD)
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 33-47 Safety Management in Rail Transport: Theoretical Assumptions and Practical Implications
In: Digital Safety in Railway Transport—Aspects of Management and Technology
by Adam Jabłoński - 41-54 Data Sources and Development for Online Risk Quantification
In: Online Probabilistic Risk Assessment of Complex Marine Systems
by Tarannom Parhizkar & Ingrid B. Utne & Jan-Erik Vinnem - 43-53 Advanced Asset Performance Management (APM) and Asset Investment Planning (AIP) Systems
In: Digital Maintenance Management
by Adolfo Crespo Márquez - 43-76 Control Charts for Monitoring Time-Between-Events-and-Amplitude Data
In: Control Charts and Machine Learning for Anomaly Detection in Manufacturing
by Philippe Castagliola & Giovanni Celano & Dorra Rahali & Shu Wu - 47-85 AMP Primary Sources
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 49-56 Digital Transformation in Rail Transport—Key Challenges and Barriers
In: Digital Safety in Railway Transport—Aspects of Management and Technology
by Marek Jabłoński - 49-68 Dynamic Risk Assessment of Fire-Induced Domino Effects
In: Integrating Safety and Security Management to Protect Chemical Industrial Areas from Domino Effects
by Chao Chen & Genserik Reniers & Ming Yang - 51-71 Computational Tools of Media Analysis for Corporate Policy Effectiveness Evaluation: Models and Their Reliability
In: Reliability and Maintainability Assessment of Industrial Systems
by Gregory S. Khvatsky & Dmitry G. Zaytsev & Valentina V. Kuskova & Anna A. Sokol - 53-72 Robust Multi-Response Based Software Reliability Modeling
In: Optimization Models in Software Reliability
by Anusha Pai & Gopalkrishna Joshi & Suraj Rane - 55-74 Human, Hardware, and Software Interactions in Risk Assessment
In: Online Probabilistic Risk Assessment of Complex Marine Systems
by Tarannom Parhizkar & Ingrid B. Utne & Jan-Erik Vinnem - 57-66 Digital Safety in Rail Transport—Basic Assumptions
In: Digital Safety in Railway Transport—Aspects of Management and Technology
by Adam Jabłoński - 57-66 The Non-ergodicity of Assets
In: Digital Maintenance Management
by Adolfo Crespo Márquez - 67-75 The Creation of Digital Innovation in Rail Transport
In: Digital Safety in Railway Transport—Aspects of Management and Technology
by Adam Jabłoński - 67-86 The Curse of Dimensionality
In: Digital Maintenance Management
by Adolfo Crespo Márquez - 67-134 Distribution Functions and Its Applications
In: Statistical Reliability Engineering
by Hoang Pham - 69-93 Dynamic Assessment of VCE-Induced Domino Effects
In: Integrating Safety and Security Management to Protect Chemical Industrial Areas from Domino Effects
by Chao Chen & Genserik Reniers & Ming Yang - 73-82 Multi-criteria Decision Making in Optimal Software Testing-Allocation Problem
In: Optimization Models in Software Reliability
by Shinji Inoue & Yuka Minamino & Shigeru Yamada - 73-91 Optimal Design of Checkpoint Systems with General Structures, Tasks and Schemes
In: Reliability and Maintainability Assessment of Industrial Systems
by Kenichiro Naruse & Toshio Nakagawa - 75-102 Human Factor Analysis and Quantification
In: Online Probabilistic Risk Assessment of Complex Marine Systems
by Tarannom Parhizkar & Ingrid B. Utne & Jan-Erik Vinnem - 77-97 Emerging Modern Trends and Technologies Increasing the Level of Rail Transport Safety
In: Digital Safety in Railway Transport—Aspects of Management and Technology
by Marek Jabłoński - 77-103 Monitoring a BAR(1) Process with EWMA and DEWMA Control Charts
In: Control Charts and Machine Learning for Anomaly Detection in Manufacturing
by Maria Anastasopoulou & Athanasios C. Rakitzis - 83-110 Release Planning Analysis Through Testing Coverage and Fault Reduction Factor Based Models with Change Point Perspective
In: Optimization Models in Software Reliability
by Neha & Gurjeet Kaur & Vinita Jindal - 87-93 AMP Secondary Sources: Aging Aircraft
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 87-97 The Dynamic Measurement of Failure Risk
In: Digital Maintenance Management
by Adolfo Crespo Márquez - 93-104 Series System Reliability: An Unified Approach Using Fatal Shock and Stress Models
In: Reliability and Maintainability Assessment of Industrial Systems
by Ricardo Puziol Oliveira & Marcos Vinicius Oliveira Peres & Wesley Bertoli & Jorge Alberto Achcar - 95-107 AMP Secondary Sources: MCAI, Modifications and Repairs, and Non-mandatory Recommendations
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 95-110 Risk Assessment of Coupled Hazardous Scenarios
In: Integrating Safety and Security Management to Protect Chemical Industrial Areas from Domino Effects
by Chao Chen & Genserik Reniers & Ming Yang - 99-107 Shaping the Safety Culture in Rail Transport by Creating and Implementing Digital Solutions
In: Digital Safety in Railway Transport—Aspects of Management and Technology
by Adam Jabłoński - 99-114 The Dynamic Scheduling of Maintenance
In: Digital Maintenance Management
by Adolfo Crespo Márquez - 103-116 Dynamic Risk Assessment to Assist Decision-Making in Emergency Situations
In: Online Probabilistic Risk Assessment of Complex Marine Systems
by Tarannom Parhizkar & Ingrid B. Utne & Jan-Erik Vinnem - 105-121 The New Attempt of Network Reliability in the Assessment of Business Activities for Precision Management
In: Reliability and Maintainability Assessment of Industrial Systems
by Shin-Guang Chen - 105-129 On Approaches for Monitoring Categorical Event Series
In: Control Charts and Machine Learning for Anomaly Detection in Manufacturing
by Christian H. Weiß - 109-118 Monitoring Safety in Rail Transport by Means of Digital Economy Solutions
In: Digital Safety in Railway Transport—Aspects of Management and Technology
by Adam Jabłoński & Marek Jabłoński - 109-143 AMP Secondary Sources: Operational Requirements and Changes to the Operation Type
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 111-131 Integrated Safety and Security Management to Tackle Domino Effects
In: Integrating Safety and Security Management to Protect Chemical Industrial Areas from Domino Effects
by Chao Chen & Genserik Reniers & Ming Yang - 111-133 Understanding Interactions Among Software Development Attributes and Release Planning Problem Through ISM and MAUT
In: Optimization Models in Software Reliability
by Vibha Verma & Anu G. Aggarwal & Hoang Pham - 117-131 Case Studies
In: Online Probabilistic Risk Assessment of Complex Marine Systems
by Tarannom Parhizkar & Ingrid B. Utne & Jan-Erik Vinnem - 117-132 Techniques for Anomalies Detection
In: Digital Maintenance Management
by Adolfo Crespo Márquez - 119-126 Conceptualization and Operationalization of the Rail Transport Digital Safety Model
In: Digital Safety in Railway Transport—Aspects of Management and Technology
by Adam Jabłoński & Marek Jabłoński - 123-142 Optimal Design of Reliability Acceptance Sampling Plans for Multi-stage Production Process
In: Reliability and Maintainability Assessment of Industrial Systems
by M. Kumar - 127-131 The Safety Triad in the Business Models of Railway Enterprises (Management–Digitalization–Socialization)
In: Digital Safety in Railway Transport—Aspects of Management and Technology
by Adam Jabłoński & Marek Jabłoński - 131-147 Machine Learning Control Charts for Monitoring Serially Correlated Data
In: Control Charts and Machine Learning for Anomaly Detection in Manufacturing
by Xiulin Xie & Peihua Qiu - 133-138 Conclusion—Empirical and Methodical Conclusions
In: Digital Safety in Railway Transport—Aspects of Management and Technology
by Adam Jabłoński & Marek Jabłoński - 133-141 Challenges of Online Dynamic Probabilistic Risk Assessment and Possible Solutions
In: Online Probabilistic Risk Assessment of Complex Marine Systems
by Tarannom Parhizkar & Ingrid B. Utne & Jan-Erik Vinnem - 133-154 An Economic Approach for Domino Effect Management
In: Integrating Safety and Security Management to Protect Chemical Industrial Areas from Domino Effects
by Chao Chen & Genserik Reniers & Ming Yang - 133-159 Asset Condition and Operations Efficiency
In: Digital Maintenance Management
by Adolfo Crespo Márquez - 135-158 Software Reliability Modeling and Assessment Integrating Time Dependent Fault Reduction Factor in Random Environment
In: Optimization Models in Software Reliability
by Nidhi Nijhawan & Vikas Dhaka - 135-222 Statistical Inference
In: Statistical Reliability Engineering
by Hoang Pham - 143-151 Attachment A—Fault Trees for Different Dynamic Positioning Systems
In: Online Probabilistic Risk Assessment of Complex Marine Systems
by Tarannom Parhizkar & Ingrid B. Utne & Jan-Erik Vinnem - 143-187 The Importance of Technical Diagnostics for Ensuring the Reliability of Industrial Systems
In: Reliability and Maintainability Assessment of Industrial Systems
by D. Lj. Branković & Z. N. Milovanović & V. Z. Janičić Milovanović - 145-165 Components Maintenance Program
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 149-185 A Review of Tree-Based Approaches for Anomaly Detection
In: Control Charts and Machine Learning for Anomaly Detection in Manufacturing
by Tommaso Barbariol & Filippo Dalla Chiara & Davide Marcato & Gian Antonio Susto - 155-176 A Resilience-Based Approach for the Prevention and Mitigation of Domino Effects
In: Integrating Safety and Security Management to Protect Chemical Industrial Areas from Domino Effects
by Chao Chen & Genserik Reniers & Ming Yang - 159-191 Multi-objective Release Time Problem for Modular Software using Fuzzy Analytical Hierarchy Process
In: Optimization Models in Software Reliability
by Neha & Anu G. Aggarwal & Ajay Jaiswal - 163-177 Asset Health Indexing and Life Cycle Costing
In: Digital Maintenance Management
by Adolfo Crespo Márquez - 167-179 AMP Task Interval Management
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 177-184 Conclusions and Future Research
In: Integrating Safety and Security Management to Protect Chemical Industrial Areas from Domino Effects
by Chao Chen & Genserik Reniers & Ming Yang - 181-185 AMP Evolution/Optimization
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 187-194 Maintenance Checks and Bridge Programs
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 187-215 Joint Use of Skip Connections and Synthetic Corruption for Anomaly Detection with Autoencoders
In: Control Charts and Machine Learning for Anomaly Detection in Manufacturing
by Anne-Sophie Collin & Christophe Vleeschouwer - 189-238 Reliability Assessment of Replaceable Shuffle Exchange Network with an Additional Stage Using Interval-Valued Universal Generating Function
In: Reliability and Maintainability Assessment of Industrial Systems
by Amisha Khati & S. B. Singh - 193-213 Neutrosophic AHP Approach for Budget Constrained Reliability Allocation Among Modules of Software System
In: Optimization Models in Software Reliability
by Vibha Verma & Sameer Anand & Anu G. Aggarwal - 195-196 Aircraft Induction
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 197-208 Critical Maintenance Tasks/Required Inspection Items
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 211-212 Reliability Program Regulatory Requirements
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 213-228 Reliability Program Process
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 215-233 Testing Resource Allocation for Software System: An Approach Integrating MEMV-OWA and DEMATEL
In: Optimization Models in Software Reliability
by Rubina Mittal & Rajat Arora - 217-241 A Comparative Study of $$\text {L}_1$$ L 1 and $$\text {L}_2$$ L 2 Norms in Support Vector Data Descriptions
In: Control Charts and Machine Learning for Anomaly Detection in Manufacturing
by Edgard M. Maboudou-Tchao & Charles W. Harrison - 223-306 System Reliability Modeling
In: Statistical Reliability Engineering
by Hoang Pham - 229-232 AMP Task Effectiveness
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 233-234 Reliability Analysis Results
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 235-261 Modeling Allocation Problem for Software with Varied Levels of Fault Severity
In: Optimization Models in Software Reliability
by Gurjeet Kaur - 237-251 The Engineering and Maintenance Organization
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 239-256 Modeling Software Vulnerability Injection-Discovery Process Incorporating Time-Delay and VIKOR Based Ranking
In: Reliability and Maintainability Assessment of Industrial Systems
by Mohini Agarwal & Deepti Aggrawal & Subhrata Das & Adarsh Anand & Navneet Bhatt - 243-269 Feature Engineering and Health Indicator Construction for Fault Detection and Diagnostic
In: Control Charts and Machine Learning for Anomaly Detection in Manufacturing
by Khanh T. P. Nguyen - 253-256 Interface of the Maintenance Program with Other Functions
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 257-258 Impact of the AMP Revision on the Organization
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 257-269 Assessment of Reliability Function and Signature of Energy Plant Complex System
In: Reliability and Maintainability Assessment of Industrial Systems
by Monika Negi & Megha Shah & Akshay Kumar & Mangey Ram & Seema Saini - 261-263 Hazards and Safety Risks
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 263-282 Integration of FAHP and COPRAS-G for Software Component Selection
In: Optimization Models in Software Reliability
by Prarna Mehta & Abhishek Tandon & Himanshu Sharma - 265-281 Human Factors
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 271-289 Reliability Evaluation and Cost Optimization of Solar Air-Conditioner
In: Reliability and Maintainability Assessment of Industrial Systems
by Ashok Singh Bhandari & Mangey Ram & Akshay Kumar & Sushil Chandra Dimri - 283-287 Organizational Factors
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 283-321 Estimation and Testing Procedures for the Reliability Functions of Exponentiated Generalized Family of Distributions and a Characterization Based on Records
In: Optimization Models in Software Reliability
by Taruna Kumari & Anupam Pathak - 289-295 Safety Programs
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 291-300 Analyzing Interrelationships Among Software Vulnerabilities Using Fuzzy DEMATEL Approach
In: Reliability and Maintainability Assessment of Industrial Systems
by Misbah Anjum & P. K. Kapur & Vernika Agarwal & Vivek Kumar - 299-304 Audits
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 301-328 Universal Generating Function Approach for Evaluating Reliability and Signature of All-Digital Protection Systems
In: Reliability and Maintainability Assessment of Industrial Systems
by Soni Bisht & S. B. Singh - 305-316 Problem Solving
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 307-347 System Reliability Estimation
In: Statistical Reliability Engineering
by Hoang Pham - 317-330 Continuous Improvement Methodologies and Tools
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 323-339 Modelling of Non-linear Multi-objective Programming and TOPSIS in Software Quality Assessment Under Picture Fuzzy Framework
In: Optimization Models in Software Reliability
by Sameer Anand & Ritu Bibyan & Aakash - 329-342 Reliability Analysis of 8 × 8 SEN- Using UGF Method
In: Reliability and Maintainability Assessment of Industrial Systems
by Vaibhav Bisht & S. B. Singh - 331-334 Decision Making
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 335-341 Innovation
In: Aircraft Maintenance Programs
by David Lapesa Barrera - 341-353 Requirement Barriers to Implement the Software Projects in Agile Development
In: Optimization Models in Software Reliability
by Deepak Kumar & Saru Dhir - 349-401 Stochastic Processes
In: Statistical Reliability Engineering
by Hoang Pham - 355-373 Ranking of Multi-release Software Reliability Growth Model Using Weighted Distance-Based Approach
In: Optimization Models in Software Reliability
by Ritu Bibyan & Sameer Anand - 403-426 Maintenance Models
In: Statistical Reliability Engineering
by Hoang Pham - 427-463 Statistical Machine Learning and Its Applications
In: Statistical Reliability Engineering
by Hoang Pham
2021
- 1-7 Introduction
In: Structural Reliability and Time-Dependent Reliability
by Cao Wang - 1-16 Generic Model of Multi-state System. Reliability, Availability and Performability in Dynamic Modes
In: Modern Dynamic Reliability Analysis for Multi-state Systems
by Anatoly Lisnianski & Ilia Frenkel & Lev Khvatskin - 3-5 Introduction
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 3-17 Modelling of the Dynamic Train-Track-Substructure Interaction for Track Monitoring
In: Intelligent Quality Assessment of Railway Switches and Crossings
by Elias Kassa & Xiaopei Cai - 7-28 Background
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 9-104 Probability Models
In: Structural Reliability and Time-Dependent Reliability
by Cao Wang - 17-51 Stochastic Processes Methods for MSS Reliability, Availability and Performability Assessment
In: Modern Dynamic Reliability Analysis for Multi-state Systems
by Anatoly Lisnianski & Ilia Frenkel & Lev Khvatskin - 19-41 Statistical Approach to Model Track Dynamics Towards the Monitoring of Railway Turnouts
In: Intelligent Quality Assessment of Railway Switches and Crossings
by Pegah Barkhordari & Roberto Galeazzi - 29-42 Reliability Study Overview
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 43-59 Improving Switches and Crossings Performance and Reliability
In: Intelligent Quality Assessment of Railway Switches and Crossings
by Sin Sin Hsu & Niall Fagan - 43-101 Introduction of Basic Core Concepts
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 53-84 LZ-Transform and Inverse LZ-Transform of a Discrete-State Continuous-Time Markov Process
In: Modern Dynamic Reliability Analysis for Multi-state Systems
by Anatoly Lisnianski & Ilia Frenkel & Lev Khvatskin - 63-80 Damage and Microstructure Evolution in Cast Hadfield Steels Used in Railway Crossings
In: Intelligent Quality Assessment of Railway Switches and Crossings
by Ankit Kumar & Roumen Petrov & Jilt Sietsma - 81-91 Metallurgical Investigation of Crossing Noses
In: Intelligent Quality Assessment of Railway Switches and Crossings
by Hilmar Kjartansson Danielsen & Somrita Dhar & Carsten Jørn Rasmussen & Dorte Juul Jensen - 85-120 Short-Term Availability, Performability and Reliability Analysis for Power Systems
In: Modern Dynamic Reliability Analysis for Multi-state Systems
by Anatoly Lisnianski & Ilia Frenkel & Lev Khvatskin - 93-105 Analysis of Sleeper Screw Failures
In: Intelligent Quality Assessment of Railway Switches and Crossings
by Xiaodan Zhang & Yubin Zhang & Carsten Jørn Rasmussen & Martin Tandrup Lange & Dorte Juul Jensen - 103-120 Dependent and Common Cause Failures
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 105-163 Monte Carlo Simulation
In: Structural Reliability and Time-Dependent Reliability
by Cao Wang - 109-127 Data Sources and Research Models for Turnouts
In: Intelligent Quality Assessment of Railway Switches and Crossings
by Petra A. Wilfling & Michael Fellinger & Peter Veit - 121-134 The LZ-Transform Application for Availability Assessment of Air Conditioning System for Chemical Laboratories
In: Modern Dynamic Reliability Analysis for Multi-state Systems
by Anatoly Lisnianski & Ilia Frenkel & Lev Khvatskin - 121-136 Extensions to Production Availability and Functional Safety Analyses
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 129-148 CoMPAcT-Data Based Condition Monitoring and Prediction Analytics for Turnouts
In: Intelligent Quality Assessment of Railway Switches and Crossings
by Michael Fellinger & Petra A. Wilfling & Stefan Marschnig - 135-148 Availability and Performability of the Reserved Cold Water Supply System for a Raw Material Manufacturing for Plastics Industry
In: Modern Dynamic Reliability Analysis for Multi-state Systems
by Anatoly Lisnianski & Ilia Frenkel & Lev Khvatskin - 139-143 The Inductive Approaches
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 145-156 Preliminary Hazard Analysis (PHA)
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 149-162 Sensitivity Evaluation for an Aging Multi-state System
In: Modern Dynamic Reliability Analysis for Multi-state Systems
by Anatoly Lisnianski & Ilia Frenkel & Lev Khvatskin - 149-166 Monitoring of Switches and Crossings/Tracks Using Smart Sensors
In: Intelligent Quality Assessment of Railway Switches and Crossings
by Elias Kassa & Jan Saramota & Amund Skavhaug - 157-164 Hazard and Operability Study (HAZOP)
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 163-179 Birnbaum Importance Assessment for Aging Multi-state Water Cooling System
In: Modern Dynamic Reliability Analysis for Multi-state Systems
by Anatoly Lisnianski & Ilia Frenkel & Lev Khvatskin - 165-172 Failure Mode, Effects (and Criticality) Analysis, FME(C)A
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 165-261 Structural Reliability Assessment
In: Structural Reliability and Time-Dependent Reliability
by Cao Wang - 167-185 Labelling the State of Railway Turnouts Based on Repair Records
In: Intelligent Quality Assessment of Railway Switches and Crossings
by Georgios Vassos & Emil Hovad & Pavol Duroska & Camilla Thyregod & André Filipe Silva Rodrigues & Line H. Clemmensen - 173-176 Other Inductive Methods
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 177-180 Comparison of Inductive Approaches
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 183-184 The Family of Boolean Approaches
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 185-193 Mathematical Framework
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 187-205 Automatic Detection of Rail Defects from Images
In: Intelligent Quality Assessment of Railway Switches and Crossings
by Emil Hovad & Helena Hansen & André Filipe Silva Rodrigues & Vedrana Andersen Dahl - 195-208 Reliability Block Diagrams (RBDs)
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 207-228 Deep Learning for Automatic Railway Maintenance
In: Intelligent Quality Assessment of Railway Switches and Crossings
by Emil Hovad & Thomas Wix & Maxim Khomiakov & Georgios Vassos & André Filipe Silva Rodrigues & Alejandro Miguel Tejada & Line H. Clemmensen - 209-225 Fault Tree Analysis (FTA)
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 227-233 Qualitative Analysis from RBDs or FTs
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 229-245 The Effects of Renewal and Tamping on Ballast and Track Geometry in Turnouts
In: Intelligent Quality Assessment of Railway Switches and Crossings
by Seyed Mohammad Asadzadeh - 235-244 Extension to Non-Coherent RBDs and FTs
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 245-255 Probabilistic Calculations of Elementary Boolean Models
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 247-260 The Organic Growth of an Asset Management System at ProRail
In: Intelligent Quality Assessment of Railway Switches and Crossings
by Jan Swier - 257-263 Semi-Quantitative Analysis from RBDs or FTs
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 261-274 Ways to Improve the Performance (And Cost) of Switches
In: Intelligent Quality Assessment of Railway Switches and Crossings
by Jan Swier - 263-359 Time-Dependent Reliability Assessment
In: Structural Reliability and Time-Dependent Reliability
by Cao Wang - 265-283 Probabilistic Calculations for Large Boolean Models
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 285-317 Time-Dependent Probabilistic Calculations
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 319-332 CCF Modelling with FTs and RBDs
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 333-371 Critical States and Importance Factors
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 373-384 Uncertainty Handling with RBDs and FTs
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 385-408 Sequential Analysis Methods
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 409-421 Combinations or Links of Boolean Models with Other Techniques
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 423-426 Automated Fault Tree Building
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 427-454 Boolean Family Exercises
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 457-470 Introduction to Dynamic Systems and Stochastic Processes
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 471-545 Markovian Modelling
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 547-586 Monte Carlo Simulation
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 587-660 Petri Net Modelling
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 661-706 Dynamic Modelling Exercises
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 709-747 Production Availability Related Modelling and Calculations
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 749-825 Functional Safety Related Modelling and Calculations
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 829-838 Standardization
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy - 839-861 Data Collection and Uncertainties
In: Reliability Assessment of Safety and Production Systems
by Jean-Pierre Signoret & Alain Leroy
2020
- 1-16 Fatigue Life Distribution Estimation
In: Reliability and Statistical Computing
by D. Gary Harlow - 1-30 Time Varying Communication Networks: Modelling, Reliability Evaluation and Optimization
In: Advances in Reliability Analysis and its Applications
by Gaurav Khanna & S. K. Chaturvedi & Sieteng Soh - 3-24 Introduction
In: Offshore Risk Assessment Vol. 1
by Jan-Erik Vinnem & Willy Røed - 3-48 DC and AC Contingency Solvers in Composite Power System Adequacy Assessment
In: Advances in RAMS Engineering
by Øystein Stake Laengen & Vijay Venu Vadlamudi - 3-59 Methodology for Quantified Risk Assessment
In: Offshore Risk Assessment Vol. 2
by Jan-Erik Vinnem & Willy Røed - 17-33 Reliability Improvement Analysis Using Fractional Failure
In: Reliability and Statistical Computing
by Mingxiao Jiang & Feng-Bin Sun - 25-75 Risk Picture—Definitions and Characteristics
In: Offshore Risk Assessment Vol. 1
by Jan-Erik Vinnem & Willy Røed - 31-93 Methods for Prognosis and Optimization of Energy Plants Efficiency in Starting Step of Life Cycle
In: Advances in Reliability Analysis and its Applications
by Z. N. Milovanović & Lj. R. Papić & V. Z. Janičić Milovanović & S. Z. Milovanović & S. R. Dumonjić-Milovanović & D. Lj. Branković - 35-46 Modelling Innovation Paths of European Firms Using Fuzzy Balanced Scorecard
In: Reliability and Statistical Computing
by Petr Hájek & Jan Stejskal & Michaela Kotková Stříteská & Viktor Prokop - 47-60 Innovation Environment in Europe—Efficiency Analysis Case Study
In: Reliability and Statistical Computing
by Viktor Prokop & Jan Stejskal & Petr Hájek & Michaela Kotková Stříteská - 49-66 Reliability Analysis of Microgrid Systems Using Hybrid Approaches
In: Advances in RAMS Engineering
by Moushumi Patowary & Bimal C. Deka & Gayadhar Panda - 61-84 Application of Artificial Intelligence in Modeling a Textile Finishing Process
In: Reliability and Statistical Computing
by Zhenglei He & Kim Phuc Tran & Sébastien Thomassey & Xianyi Zeng & Changhai Yi - 61-144 Analysis Techniques
In: Offshore Risk Assessment Vol. 2
by Jan-Erik Vinnem & Willy Røed - 67-84 Reliability Prediction of Instrumentation and Control Cables for NPP Applications
In: Advances in RAMS Engineering
by T. V. Santhosh & V. Gopika & A. K. Ghosh & B. G. Fernandes & J. Chattopadhyay - 77-101 Risk Assessment Process and Main Elements
In: Offshore Risk Assessment Vol. 1
by Jan-Erik Vinnem & Willy Røed - 85-106 Developing Alert Level for Aircraft Components
In: Reliability and Statistical Computing
by Wai Yeung Man & Eric T. T. Wong - 85-107 Fatigue Life Model for PLCC Solder Joints Under Thermal Cycling Stress
In: Advances in RAMS Engineering
by Rohit Khatri & Diana Denice & Manoj Kumar - 95-148 Planning Methods for Production Systems Development in the Energy Sector and Energy Efficiency
In: Advances in Reliability Analysis and its Applications
by Z. N. Milovanović & Lj. R. Papić & S. Z. Milovanović & V. Z. Janičić Milovanović & S. R. Dumonjić-Milovanović & D. Lj. Branković - 103-184 Lessons from Major Accidents
In: Offshore Risk Assessment Vol. 1
by Jan-Erik Vinnem & Willy Røed - 107-126 Computation in Network Reliability
In: Reliability and Statistical Computing
by Shin-Guang Chen - 109-148 An Integrated Approach of BOCR Modeling Framework for Decision Tool Evaluation
In: Advances in RAMS Engineering
by Krishna Mohan Kovur & Ravi Kumar Gedela - 127-137 Integrating Sentiment Analysis in Recommender Systems
In: Reliability and Statistical Computing
by Bui Thanh Hung - 139-150 Crowdsourcing Platform for Collecting Cognitive Feedbacks from Users: A Case Study on Movie Recommender System
In: Reliability and Statistical Computing
by Luong Vuong Nguyen & Jason J. Jung