IDEAS home Printed from https://ideas.repec.org/p/pra/mprapa/113787.html
   My bibliography  Save this paper

The problem of combined optimal load flow control of main conveyor line

Author

Listed:
  • Pihnastyi, Oleh
  • Khodusov, Valery
  • Kotova, Anna

Abstract

The combined method of flow parameters control of conveyor transport system is researched in this article. A transport system a distributed model with input accumulative bunker is developed for the optimal control synthesis. The transport system model is presented in dimensionless form. Expressions are obtained that determine the states of flow parameters along the transport route. The amount of transport delay was calculated for each technological position of the transport route at an arbitrary point in time. A system of characteristic equations is written down, the solution of which determines the trajectory of movement of a separate element of the transported material. Conditions are considered under which the material output flow does not depend on the initial filling of the conveyor section with the material. The algorithm of optimal control development of the material flow rate at the output from the accumulative bunker and the conveyor belt speed, which ensures the minimum deviation of the output cargo flow from a planned amount, is given. The optimal control algorithm takes into account the restrictions on the control modes of flow parameters and the volume of the accumulating bunker. It is shown that the developed control algorithm ensures the maximum filling of the transport system with material and forms a uniform distribution of material along the transportation route

Suggested Citation

  • Pihnastyi, Oleh & Khodusov, Valery & Kotova, Anna, 2022. "The problem of combined optimal load flow control of main conveyor line," MPRA Paper 113787, University Library of Munich, Germany, revised 05 Jun 2022.
    • Handle: RePEc:pra:mprapa:113787
    as

    Download full text from publisher

    File URL: https://mpra.ub.uni-muenchen.de/113787/1/PiKh_Acta.pdf
    File Function: original version
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Tebello Mathaba & Xiaohua Xia, 2015. "A Parametric Energy Model for Energy Management of Long Belt Conveyors," Energies, MDPI, vol. 8(12), pages 1-19, December.
    2. Pihnastyi, Oleh & Khodusov, Valery, 2019. "The optimal control problem for output material flow on a conveyor belt with input accumulating bunker," MPRA Paper 95928, University Library of Munich, Germany, revised 07 Jan 2019.
    3. Zhang, Shirong & Xia, Xiaohua, 2011. "Modeling and energy efficiency optimization of belt conveyors," Applied Energy, Elsevier, vol. 88(9), pages 3061-3071.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Pihnastyi, Oleh & Chernіavska, Svіtlana, 2022. "Improvement of methods for description of a three-bunker collection conveyor," MPRA Paper 115529, University Library of Munich, Germany, revised 15 Oct 2022.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Piotr Kulinowski & Piotr Kasza & Jacek Zarzycki, 2021. "Influence of Design Parameters of Idler Bearing Units on the Energy Consumption of a Belt Conveyor," Sustainability, MDPI, vol. 13(1), pages 1-13, January.
    2. Chunyu Yang & Jinhao Liu & Heng Li & Linna Zhou, 2018. "Energy Modeling and Parameter Identification of Dual-Motor-Driven Belt Conveyors without Speed Sensors," Energies, MDPI, vol. 11(12), pages 1-17, November.
    3. Pihnastyi, Oleh & Kozhevnikov, Georgii & Ivanovska, Olha, 2022. "Maxwell-Element Model for Describing Conveyor Belt Stresses," MPRA Paper 112560, University Library of Munich, Germany, revised 01 Jan 2022.
    4. He, Daijie & Pang, Yusong & Lodewijks, Gabriel, 2017. "Green operations of belt conveyors by means of speed control," Applied Energy, Elsevier, vol. 188(C), pages 330-341.
    5. Piotr Kulinowski & Piotr Kasza & Jacek Zarzycki, 2022. "Methods of Testing of Roller Rotational Resistance in Aspect of Energy Consumption of a Belt Conveyor," Energies, MDPI, vol. 16(1), pages 1-12, December.
    6. Pihnastyi, Oleh & Kozhevnikov, Georgii, 2020. "Control of a Conveyor Based on a Neural Network," MPRA Paper 111950, University Library of Munich, Germany, revised 09 Oct 2021.
    7. Du Plessis, Gideon Edgar & Liebenberg, Leon & Mathews, Edward Henry, 2013. "The use of variable speed drives for cost-effective energy savings in South African mine cooling systems," Applied Energy, Elsevier, vol. 111(C), pages 16-27.
    8. Zhang, Lijun & Chennells, Michael & Xia, Xiaohua, 2018. "A power dispatch model for a ferrochrome plant heat recovery cogeneration system," Applied Energy, Elsevier, vol. 227(C), pages 180-189.
    9. Muller, C.J. & Craig, I.K., 2016. "Energy reduction for a dual circuit cooling water system using advanced regulatory control," Applied Energy, Elsevier, vol. 171(C), pages 287-295.
    10. Pihnastyi, Oleh & Burduk, Anna, 2022. "Analysis of a Dataset for Modeling a Transport Conveyor," MPRA Paper 116161, University Library of Munich, Germany, revised 26 Nov 2022.
    11. Pihnastyi, Oleh & Khodusov, Valery & Kozhevnikov, Georgii & Bondarenko, Tetiana, 2021. "Analysis of dynamic mechanic belt stresses of the magistral conveyor," MPRA Paper 110216, University Library of Munich, Germany, revised 05 Feb 2021.
    12. Witold Kawalec & Natalia Suchorab & Martyna Konieczna-Fuławka & Robert Król, 2020. "Specific Energy Consumption of a Belt Conveyor System in a Continuous Surface Mine," Energies, MDPI, vol. 13(19), pages 1-10, October.
    13. Paweł Bogacz & Łukasz Cieślik & Dawid Osowski & Paweł Kochaj, 2022. "Analysis of the Scope for Reducing the Level of Energy Consumption of Crew Transport in an Underground Mining Plant Using a Conveyor Belt System Mining Plant," Energies, MDPI, vol. 15(20), pages 1-16, October.
    14. Numbi, B.P. & Xia, X., 2015. "Systems optimization model for energy management of a parallel HPGR crushing process," Applied Energy, Elsevier, vol. 149(C), pages 133-147.
    15. Jianhua Ji & Changyun Miao & Xianguo Li & Yi Liu, 2021. "Speed regulation strategy and algorithm for the variable-belt-speed energy-saving control of a belt conveyor based on the material flow rate," PLOS ONE, Public Library of Science, vol. 16(2), pages 1-15, February.
    16. Tonini, Davide & Dorini, Gianluca & Astrup, Thomas Fruergaard, 2014. "Bioenergy, material, and nutrients recovery from household waste: Advanced material, substance, energy, and cost flow analysis of a waste refinery process," Applied Energy, Elsevier, vol. 121(C), pages 64-78.
    17. Mirosław Bajda & Monika Hardygóra, 2021. "Analysis of the Influence of the Type of Belt on the Energy Consumption of Transport Processes in a Belt Conveyor," Energies, MDPI, vol. 14(19), pages 1-17, September.
    18. Pihnastyi, Oleh & Khodusov, Valery, 2020. "Neural model of conveyor type transport system," MPRA Paper 101527, University Library of Munich, Germany, revised 01 May 2020.
    19. Tebello Mathaba & Xiaohua Xia, 2015. "A Parametric Energy Model for Energy Management of Long Belt Conveyors," Energies, MDPI, vol. 8(12), pages 1-19, December.
    20. Pihnastyi, Oleh & Khodusov, Valery, 2020. "Development of the controlling speed algorithm of the conveyor belt based on TOU-tariffs," MPRA Paper 104681, University Library of Munich, Germany, revised 12 Nov 2020.

    More about this item

    Keywords

    Conveyor optimal control; accumulative bunker; distributed transport system;
    All these keywords.

    JEL classification:

    • C02 - Mathematical and Quantitative Methods - - General - - - Mathematical Economics
    • C15 - Mathematical and Quantitative Methods - - Econometric and Statistical Methods and Methodology: General - - - Statistical Simulation Methods: General
    • C44 - Mathematical and Quantitative Methods - - Econometric and Statistical Methods: Special Topics - - - Operations Research; Statistical Decision Theory
    • D24 - Microeconomics - - Production and Organizations - - - Production; Cost; Capital; Capital, Total Factor, and Multifactor Productivity; Capacity

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:pra:mprapa:113787. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Joachim Winter (email available below). General contact details of provider: https://edirc.repec.org/data/vfmunde.html .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.