IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v243y2024ics0951832023006968.html
   My bibliography  Save this article

A truncated test scheme design method for success-failure in-orbit tests

Author

Listed:
  • Ding, Wenzhe
  • Bai, Xiang
  • Wang, Qingwei
  • Long, Fang
  • Li, Hailin
  • Wu, Zhengrong
  • Liu, Jian
  • Yao, Huisheng
  • Yang, Hong

Abstract

Based on the success-failure test feature of in-orbit tests (IOTs) for typical space equipment, this paper presents a method for designing a truncated test scheme for success-failure in-orbit tests. With this method, a small upper boundary of the sample size for the IOT verification test can be obtained before the test starts. The method introduces the truncated Bayes-sequential mesh test (SMT) method into the design of the IOT verification test scheme and greatly compresses the continuous test area by incorporating optimization theory, resulting in a smaller upper limit of the IOT sample size. First, this paper derives a specific calculation formula for the Bayes-SMT critical line. Second, the Markov chain model is adopted to calculate the occurrence probabilities of each acceptance and rejection point through state transition. Finally, an optimal truncated test optimization algorithm based on the augmented lagrangian genetic algorithm is proposed. Simulation tests show that, compared with the classical single sampling method, the truncated sequential probability ratio test method, the truncated SMT method, and the truncated Bayes-SMT method based on step-by-step calculation, the method presented in this paper can be used to obtain a sequential test scheme with smaller truncated sample size.

Suggested Citation

  • Ding, Wenzhe & Bai, Xiang & Wang, Qingwei & Long, Fang & Li, Hailin & Wu, Zhengrong & Liu, Jian & Yao, Huisheng & Yang, Hong, 2024. "A truncated test scheme design method for success-failure in-orbit tests," Reliability Engineering and System Safety, Elsevier, vol. 243(C).
    • Handle: RePEc:eee:reensy:v:243:y:2024:i:c:s0951832023006968
    DOI: 10.1016/j.ress.2023.109782
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832023006968
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2023.109782?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Puisa, Romanas & Montewka, Jakub & Krata, Przemyslaw, 2023. "A framework estimating the minimum sample size and margin of error for maritime quantitative risk analysis," Reliability Engineering and System Safety, Elsevier, vol. 235(C).
    2. Ranjan, Rakesh & Sen, Rijji & Upadhyay, Satyanshu K., 2021. "Bayes analysis of some important lifetime models using MCMC based approaches when the observations are left truncated and right censored," Reliability Engineering and System Safety, Elsevier, vol. 214(C).
    3. Kampitsis, Dimitris & Panagiotidou, Sofia, 2022. "A Bayesian condition-based maintenance and monitoring policy with variable sampling intervals," Reliability Engineering and System Safety, Elsevier, vol. 218(PA).
    4. Zio, Enrico, 2022. "Prognostics and Health Management (PHM): Where are we and where do we (need to) go in theory and practice," Reliability Engineering and System Safety, Elsevier, vol. 218(PA).
    5. Yong Zhang & Chao Wang & Xin Lin & Guanjun Liu & Peng Yang & Jing Qiu, 2020. "A censored sequential posterior odd test method in testability demonstration test planning," Journal of Risk and Reliability, , vol. 234(4), pages 579-587, August.
    6. Calvert, Gareth & Neves, Luis & Andrews, John & Hamer, Matthew, 2020. "Multi-defect modelling of bridge deterioration using truncated inspection records," Reliability Engineering and System Safety, Elsevier, vol. 200(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mingfei Li & Jiajian Wu & Zhengpeng Chen & Jiangbo Dong & Zhiping Peng & Kai Xiong & Mumin Rao & Chuangting Chen & Xi Li, 2022. "Data-Driven Voltage Prognostic for Solid Oxide Fuel Cell System Based on Deep Learning," Energies, MDPI, vol. 15(17), pages 1-20, August.
    2. Kamei, Sayaka & Taghipour, Sharareh, 2023. "A comparison study of centralized and decentralized federated learning approaches utilizing the transformer architecture for estimating remaining useful life," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    3. Zuo, Jian & Cadet, Catherine & Li, Zhongliang & Bérenguer, Christophe & Outbib, Rachid, 2024. "A deterioration-aware energy management strategy for the lifetime improvement of a multi-stack fuel cell system subject to a random dynamic load," Reliability Engineering and System Safety, Elsevier, vol. 241(C).
    4. Costa, Nahuel & Sánchez, Luciano, 2022. "Variational encoding approach for interpretable assessment of remaining useful life estimation," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    5. Lewis, Austin D. & Groth, Katrina M., 2022. "Metrics for evaluating the performance of complex engineering system health monitoring models," Reliability Engineering and System Safety, Elsevier, vol. 223(C).
    6. Saud Almutairi & Mudthir Bakri & Abdullatif A. AlMunifi & Mohammed Algahtany & Saud Aldalbahy, 2023. "The Status of the Saudi Construction Industry during the COVID-19 Pandemic," Sustainability, MDPI, vol. 15(21), pages 1-21, October.
    7. Zheng, Shuwen & Wang, Chong & Zio, Enrico & Liu, Jie, 2024. "Fault detection in complex mechatronic systems by a hierarchical graph convolution attention network based on causal paths," Reliability Engineering and System Safety, Elsevier, vol. 243(C).
    8. Zaitseva, Elena & Levashenko, Vitaly & Rabcan, Jan, 2023. "A new method for analysis of Multi-State systems based on Multi-valued decision diagram under epistemic uncertainty," Reliability Engineering and System Safety, Elsevier, vol. 229(C).
    9. Li Li & Yu Lu & Miaojuan Peng, 2022. "Deterioration Model for Reinforced Concrete Bridge Girders Based on Survival Analysis," Mathematics, MDPI, vol. 10(23), pages 1-16, November.
    10. Boumallessa, Zeineb & Chouikhi, Houssam & Elleuch, Mounir & Bentaher, Hatem, 2023. "Modeling and optimizing the maintenance schedule using dynamic quality and machine condition monitors in an unreliable single production system," Reliability Engineering and System Safety, Elsevier, vol. 235(C).
    11. Dan Su & Yi-Sheng Liu & Xin-Tong Li & Xiao-Yan Chen & Dong-Han Li, 2020. "Management Path of Concrete Beam Bridge in China from the Perspective of Sustainable Development," Sustainability, MDPI, vol. 12(17), pages 1-22, September.
    12. Zhiyuan Zuo & Liang Wang & Yuhlong Lio, 2022. "Reliability Estimation for Dependent Left-Truncated and Right-Censored Competing Risks Data with Illustrations," Energies, MDPI, vol. 16(1), pages 1-25, December.
    13. Lyu, Dongzhen & Niu, Guangxing & Liu, Enhui & Zhang, Bin & Chen, Gang & Yang, Tao & Zio, Enrico, 2022. "Time space modelling for fault diagnosis and prognosis with uncertainty management: A general theoretical formulation," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    14. Zhang, Chunfang & Wang, Liang & Bai, Xuchao & Huang, Jianan, 2022. "Bayesian reliability analysis for copula based step-stress partially accelerated dependent competing risks model," Reliability Engineering and System Safety, Elsevier, vol. 227(C).
    15. Hao, Zhaojun & Di Maio, Francesco & Zio, Enrico, 2023. "A sequential decision problem formulation and deep reinforcement learning solution of the optimization of O&M of cyber-physical energy systems (CPESs) for reliable and safe power production and supply," Reliability Engineering and System Safety, Elsevier, vol. 235(C).
    16. Mateusz Oszczypała & Jarosław Ziółkowski & Jerzy Małachowski, 2022. "Analysis of Light Utility Vehicle Readiness in Military Transportation Systems Using Markov and Semi-Markov Processes," Energies, MDPI, vol. 15(14), pages 1-24, July.
    17. Han, Te & Li, Yan-Fu, 2022. "Out-of-distribution detection-assisted trustworthy machinery fault diagnosis approach with uncertainty-aware deep ensembles," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    18. Chen, Rentong & Zhang, Chao & Wang, Shaoping & Zio, Enrico & Dui, Hongyan & Zhang, Yadong, 2023. "Importance measures for critical components in complex system based on Copula Hierarchical Bayesian Network," Reliability Engineering and System Safety, Elsevier, vol. 230(C).
    19. Zou, Xinyu & Tao, Laifa & Sun, Lulu & Wang, Chao & Ma, Jian & Lu, Chen, 2023. "A case-learning-based paradigm for quantitative recommendation of fault diagnosis algorithms: A case study of gearbox," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
    20. Shi, Yaowei & Deng, Aidong & Deng, Minqiang & Xu, Meng & Liu, Yang & Ding, Xue & Bian, Wenbin, 2023. "Domain augmentation generalization network for real-time fault diagnosis under unseen working conditions," Reliability Engineering and System Safety, Elsevier, vol. 235(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:243:y:2024:i:c:s0951832023006968. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.