IDEAS home Printed from https://ideas.repec.org/a/spr/operea/v22y2022i5d10.1007_s12351-022-00722-0.html
   My bibliography  Save this article

Exact analysis of a push–pull system with multiple non identical retailers, a distribution center and multiple non identical unreliable suppliers with supply disruptions

Author

Listed:
  • Angelos Kourepis

    (Aristotle University of Thessaloniki)

  • Alexandros Diamantidis

    (Aristotle University of Thessaloniki)

  • Stylianos Koukoumialos

    (University of Thessaly)

Abstract

In this paper, a push–pull system with K ( $$K \ge 1$$ K ≥ 1 ) non identical suppliers with disruptions that send products to an intermediate distribution center which in turn serves M ( $$M \ge 1$$ M ≥ 1 ) non identical retailers is analyzed. Each retailer satisfies a Poisson distributed external demand of one product unit.The flow of material at the upstream stages (suppliers) is push type. The flow of material at the downstream stages (retailers) is driven by a continuous review inventory control policy (s, S). The replenishment rate of suppliers and retailers is exponentially distributed. More over it is assumed that the suppliers may not be always operational. This is modelled using exponentially distributed failure and repair rates of the suppliers. The considered system is modelled as a continuous time Markov process with discrete states. The derivation of the transition probabilities among the various states of the system is given. Solving the corresponding transition equations system, the stationary probabilities of the system's states are computed and therefore using the stationary probabilities, performance measures of the considered system such as the Fill Rate and WIP are evaluated. Moreover the effect of the system parameters on its performance measures is thoroughly explored. Finally the proposed model is examined from an economic point of view, where the optimal parameter values for the (s, S) type policy are detected to minimize a total inventory cost function.

Suggested Citation

  • Angelos Kourepis & Alexandros Diamantidis & Stylianos Koukoumialos, 2022. "Exact analysis of a push–pull system with multiple non identical retailers, a distribution center and multiple non identical unreliable suppliers with supply disruptions," Operational Research, Springer, vol. 22(5), pages 4801-4827, November.
  • Handle: RePEc:spr:operea:v:22:y:2022:i:5:d:10.1007_s12351-022-00722-0
    DOI: 10.1007/s12351-022-00722-0
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s12351-022-00722-0
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.

    File URL: https://libkey.io/10.1007/s12351-022-00722-0?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Alexandros Diamantidis & Stylianos Koukoumialos & Michael Vidalis, 2017. "Markovian Analysis of a Push-Pull Merge System with Two Suppliers, An Intermediate Buffer, and Two Retailers," International Journal of Operations Research and Information Systems (IJORIS), IGI Global, vol. 8(2), pages 1-35, April.
    2. Sridhar Bashyam & Michael C. Fu, 1998. "Optimization of (s, S) Inventory Systems with Random Lead Times and a Service Level Constraint," Management Science, INFORMS, vol. 44(12-Part-2), pages 243-256, December.
    3. A.C. Diamantidis & S.I. Koukoumialos & M.I. Vidalis, 2016. "Performance evaluation of a push--pull merge system with multiple suppliers, an intermediate buffer and a distribution centre with parallel machines/channels," International Journal of Production Research, Taylor & Francis Journals, vol. 54(9), pages 2628-2652, May.
    4. Rafael Diaz & Barry Charles Ezell, 2012. "A Simulation-Based Optimization Approach to a Lost Sale Stochastic Inventory Model," International Journal of Operations Research and Information Systems (IJORIS), IGI Global, vol. 3(2), pages 46-63, April.
    5. Yonit Barron & Opher Baron, 2020. "QMCD approach for perishability models: The (S, s) control policy with lead time," IISE Transactions, Taylor & Francis Journals, vol. 52(2), pages 133-150, February.
    6. Visentin, Andrea & Prestwich, Steven & Rossi, Roberto & Tarim, S. Armagan, 2021. "Computing optimal (R,s,S) policy parameters by a hybrid of branch-and-bound and stochastic dynamic programming," European Journal of Operational Research, Elsevier, vol. 294(1), pages 91-99.
    7. Sandun Perera & Ganesh Janakiraman & Shun†Chen Niu, 2018. "Optimality of (s, S) Inventory Policies under Renewal Demand and General Cost Structures," Production and Operations Management, Production and Operations Management Society, vol. 27(2), pages 368-383, February.
    8. Nazanin Esmaili & Bryan A. Norman & Jayant Rajgopal, 2019. "Exact analysis of (R, s, S) inventory control systems with lost sales and zero lead time," Naval Research Logistics (NRL), John Wiley & Sons, vol. 66(2), pages 123-132, March.
    9. Diomidis Spinellis & Michael J. Vidalis & Michael E. J. O'Kelly & Chrissoleon T. Papadopoulos, 2009. "Analysis and Design of Discrete Part Production Lines," Springer Optimization and Its Applications, Springer, number 978-0-387-89494-2, June.
    10. Nasr, Walid W. & Maddah, Bacel, 2015. "Continuous (s, S) policy with MMPP correlated demand," European Journal of Operational Research, Elsevier, vol. 246(3), pages 874-885.
    11. Noblesse, Ann M. & Boute, Robert N. & Lambrecht, Marc R. & Van Houdt, Benny, 2014. "Characterizing order processes of continuous review (s,S) and (r,nQ) policies," European Journal of Operational Research, Elsevier, vol. 236(2), pages 534-547.
    12. Kamran Karimi Movahed & Zhi-Hai Zhang, 2015. "Robust design of (, ) inventory policy parameters in supply chains with demand and lead time uncertainties," International Journal of Systems Science, Taylor & Francis Journals, vol. 46(12), pages 2258-2268, September.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sandun C. Perera & Suresh P. Sethi, 2023. "A survey of stochastic inventory models with fixed costs: Optimality of (s, S) and (s, S)‐type policies—Discrete‐time case," Production and Operations Management, Production and Operations Management Society, vol. 32(1), pages 131-153, January.
    2. George Varlas & Michael Vidalis & Stelios Koukoumialos & Alexandros Diamantidis, 2021. "Optimal inventory control policies of a two-stage push–pull production inventory system with lost sales under stochastic production, transportation, and external demand," TOP: An Official Journal of the Spanish Society of Statistics and Operations Research, Springer;Sociedad de Estadística e Investigación Operativa, vol. 29(3), pages 799-832, October.
    3. Gong, Min & Lian, Zhaotong & Xiao, Hua, 2022. "Inventory control policy for perishable products under a buyback contract and Brownian demands," International Journal of Production Economics, Elsevier, vol. 251(C).
    4. Noordhoek, Marije & Dullaert, Wout & Lai, David S.W. & de Leeuw, Sander, 2018. "A simulation–optimization approach for a service-constrained multi-echelon distribution network," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 114(C), pages 292-311.
    5. Qiu, Ruozhen & Sun, Minghe & Lim, Yun Fong, 2017. "Optimizing (s, S) policies for multi-period inventory models with demand distribution uncertainty: Robust dynamic programing approaches," European Journal of Operational Research, Elsevier, vol. 261(3), pages 880-892.
    6. Mario Guajardo & Mikael Rönnqvist & Ann Mari Halvorsen & Svein Inge Kallevik, 2015. "Inventory management of spare parts in an energy company," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 66(2), pages 331-341, February.
    7. Duan, Qinglin & Warren Liao, T., 2013. "Optimization of replenishment policies for decentralized and centralized capacitated supply chains under various demands," International Journal of Production Economics, Elsevier, vol. 142(1), pages 194-204.
    8. Konstantinos S. Boulas & Georgios D. Dounias & Chrissoleon T. Papadopoulos, 2023. "A hybrid evolutionary algorithm approach for estimating the throughput of short reliable approximately balanced production lines," Journal of Intelligent Manufacturing, Springer, vol. 34(2), pages 823-852, February.
    9. Jorge A. Sefair & Oscar Guaje & Andrés L. Medaglia, 2021. "A column-oriented optimization approach for the generation of correlated random vectors," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 43(3), pages 777-808, September.
    10. Angun, M.E. & Kleijnen, Jack P.C., 2012. "An asymptotic test of optimality conditions in multiresponse simulation optimization," Other publications TiSEM a69dfa59-b0e1-45bd-8cd6-a, Tilburg University, School of Economics and Management.
    11. van Beers, Wim C.M. & Kleijnen, Jack P.C., 2008. "Customized sequential designs for random simulation experiments: Kriging metamodeling and bootstrapping," European Journal of Operational Research, Elsevier, vol. 186(3), pages 1099-1113, May.
    12. Sumit Kunnumkal & Huseyin Topaloglu, 2009. "A stochastic approximation method for the single-leg revenue management problem with discrete demand distributions," Mathematical Methods of Operations Research, Springer;Gesellschaft für Operations Research (GOR);Nederlands Genootschap voor Besliskunde (NGB), vol. 70(3), pages 477-504, December.
    13. Benjamin Avanzi & Greg Taylor & Bernard Wong & Alan Xian, 2020. "Modelling and understanding count processes through a Markov-modulated non-homogeneous Poisson process framework," Papers 2003.13888, arXiv.org, revised May 2020.
    14. Babai, M.Z. & Boylan, J.E. & Syntetos, A.A. & Ali, M.M., 2016. "Reduction of the value of information sharing as demand becomes strongly auto-correlated," International Journal of Production Economics, Elsevier, vol. 181(PA), pages 130-135.
    15. Huynh, Linh & Hoang, Hien & Tran, Hung, 2020. "Does FDI enhance provincial productivity? A panel data analysis in Vietnam," MPRA Paper 117620, University Library of Munich, Germany, revised Aug 2021.
    16. Tsai, Shing Chih & Chen, Sin Ting, 2017. "A simulation-based multi-objective optimization framework: A case study on inventory management," Omega, Elsevier, vol. 70(C), pages 148-159.
    17. Michael C. Fu, 2008. "What you should know about simulation and derivatives," Naval Research Logistics (NRL), John Wiley & Sons, vol. 55(8), pages 723-736, December.
    18. Ziwei Lin & Nicla Frigerio & Andrea Matta & Shichang Du, 2021. "Multi-fidelity surrogate-based optimization for decomposed buffer allocation problems," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 43(1), pages 223-253, March.
    19. Nasr, Walid W. & Elshar, Ibrahim J., 2018. "Continuous inventory control with stochastic and non-stationary Markovian demand," European Journal of Operational Research, Elsevier, vol. 270(1), pages 198-217.
    20. Michael Vidalis & Stelios Koukoumialos & Alexandros Diamantidis & George Blanas, 2022. "Analysis of a two echelon supply chain with merging suppliers, a storage area and a distribution center with parallel channels," Operational Research, Springer, vol. 22(1), pages 703-740, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:operea:v:22:y:2022:i:5:d:10.1007_s12351-022-00722-0. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.