IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v130y2011i1p77-86.html
   My bibliography  Save this article

Multi-objective models for lot-sizing with supplier selection

Author

Listed:
  • Rezaei, Jafar
  • Davoodi, Mansoor

Abstract

In this paper, two multi-objective mixed integer non-linear models are developed for multi-period lot-sizing problems involving multiple products and multiple suppliers. Each model is constructed on the basis of three objective functions (cost, quality and service level) and a set of constraints. The total costs consist of purchasing, ordering, holding (and backordering) and transportation costs. Ordering cost is seen as an 'ordering frequency'-dependent function, whereas total quality and service level are seen as time-dependent functions. The first model represents this problem in situations where shortage is not allowed while in the second model, all the demand during the stock-out period is backordered. Considering the complexity of these models on the one hand, and the ability of genetic algorithms to obtain a set of Pareto-optimal solutions, we apply a genetic algorithm in an innovative approach to solve the models. Comparison results indicate that, in a backordering situation, buyers are better able to optimize their objectives compared to situations where there is no shortage. If we take ordering frequency into account, the total costs are reduced significantly.

Suggested Citation

  • Rezaei, Jafar & Davoodi, Mansoor, 2011. "Multi-objective models for lot-sizing with supplier selection," International Journal of Production Economics, Elsevier, vol. 130(1), pages 77-86, March.
  • Handle: RePEc:eee:proeco:v:130:y:2011:i:1:p:77-86
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925-5273(10)00446-9
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Liao, Zhiying & Rittscher, Jens, 2007. "A multi-objective supplier selection model under stochastic demand conditions," International Journal of Production Economics, Elsevier, vol. 105(1), pages 150-159, January.
    2. Robinson, Powell & Narayanan, Arunachalam & Sahin, Funda, 2009. "Coordinated deterministic dynamic demand lot-sizing problem: A review of models and algorithms," Omega, Elsevier, vol. 37(1), pages 3-15, February.
    3. Ghodsypour, S. H. & O'Brien, C., 1998. "A decision support system for supplier selection using an integrated analytic hierarchy process and linear programming," International Journal of Production Economics, Elsevier, vol. 56(1), pages 199-212, September.
    4. Ertogral, K. & Darwish, M. & Ben-Daya, M., 2007. "Production and shipment lot sizing in a vendor-buyer supply chain with transportation cost," European Journal of Operational Research, Elsevier, vol. 176(3), pages 1592-1606, February.
    5. Eric T. Anderson & Gavan J. Fitzsimons & Duncan Simester, 2006. "Measuring and Mitigating the Costs of Stockouts," Management Science, INFORMS, vol. 52(11), pages 1751-1763, November.
    6. Harvey M. Wagner, 2004. "Comments on ÜDynamic Version of the Economic Lot Size ModelÝ," Management Science, INFORMS, vol. 50(12_supple), pages 1775-1777, December.
    7. Gabriel R. Bitran & Horacio H. Yanasse, 1982. "Computational Complexity of the Capacitated Lot Size Problem," Management Science, INFORMS, vol. 28(10), pages 1174-1186, October.
    8. Herbert Meyr & Michael Wagner & Jens Rohde, 2008. "Structure of Advanced Planning Systems," Springer Books, in: Hartmut Stadtler & Christoph Kilger (ed.), Supply Chain Management and Advanced Planning, edition 4, chapter 5, pages 109-115, Springer.
    9. Disney, S. M. & Naim, M. M. & Towill, D. R., 2000. "Genetic algorithm optimisation of a class of inventory control systems," International Journal of Production Economics, Elsevier, vol. 68(3), pages 259-278, December.
    10. Woo, York Y. & Hsu, Shu-Lu & Wu, Soushan, 2001. "An integrated inventory model for a single vendor and multiple buyers with ordering cost reduction," International Journal of Production Economics, Elsevier, vol. 73(3), pages 203-215, October.
    11. Amid, A. & Ghodsypour, S.H. & O'Brien, C., 2006. "Fuzzy multiobjective linear model for supplier selection in a supply chain," International Journal of Production Economics, Elsevier, vol. 104(2), pages 394-407, December.
    12. Liberopoulos, George & Tsikis, Isidoros & Delikouras, Stefanos, 2010. "Backorder penalty cost coefficient "b": What could it be?," International Journal of Production Economics, Elsevier, vol. 123(1), pages 166-178, January.
    13. Berden, Thijs P. J. & Brombacher, Aarnout C. & Sander, Peter C., 2000. "The building bricks of product quality: An overview of some basic concepts and principles," International Journal of Production Economics, Elsevier, vol. 67(1), pages 3-15, August.
    14. S. Çetinkaya & M. Parlar, 1998. "Nonlinear Programming Analysis to Estimate Implicit Inventory Backorder Costs," Journal of Optimization Theory and Applications, Springer, vol. 97(1), pages 71-92, April.
    15. Harvey M. Wagner & Thomson M. Whitin, 1958. "Dynamic Version of the Economic Lot Size Model," Management Science, INFORMS, vol. 5(1), pages 89-96, October.
    16. van Norden, Linda & van de Velde, Steef, 2005. "Multi-product lot-sizing with a transportation capacity reservation contract," European Journal of Operational Research, Elsevier, vol. 165(1), pages 127-138, August.
    17. Hop, Nguyen Van & Tabucanon, Mario T., 2005. "Adaptive genetic algorithm for lot-sizing problem with self-adjustment operation rate," International Journal of Production Economics, Elsevier, vol. 98(2), pages 129-135, November.
    18. Ghodsypour, S. H. & O'Brien, C., 2001. "The total cost of logistics in supplier selection, under conditions of multiple sourcing, multiple criteria and capacity constraint," International Journal of Production Economics, Elsevier, vol. 73(1), pages 15-27, August.
    19. Dellaert, N. & Jeunet, J. & Jonard, N., 2000. "A genetic algorithm to solve the general multi-level lot-sizing problem with time-varying costs," International Journal of Production Economics, Elsevier, vol. 68(3), pages 241-257, December.
    20. Xu, He, 2010. "Managing production and procurement through option contracts in supply chains with random yield," International Journal of Production Economics, Elsevier, vol. 126(2), pages 306-313, August.
    21. Ben-Daya, M. & Darwish, M. & Ertogral, K., 2008. "The joint economic lot sizing problem: Review and extensions," European Journal of Operational Research, Elsevier, vol. 185(2), pages 726-742, March.
    22. Karimi, B. & Fatemi Ghomi, S. M. T. & Wilson, J. M., 2003. "The capacitated lot sizing problem: a review of models and algorithms," Omega, Elsevier, vol. 31(5), pages 365-378, October.
    23. M. Florian & J. K. Lenstra & A. H. G. Rinnooy Kan, 1980. "Deterministic Production Planning: Algorithms and Complexity," Management Science, INFORMS, vol. 26(7), pages 669-679, July.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Suliman, Saad M.A. & Jawad, Sayed Husain, 2012. "Optimization of preventive maintenance schedule and production lot size," International Journal of Production Economics, Elsevier, vol. 137(1), pages 19-28.
    2. Lamba, Kuldeep & Singh, Surya Prakash, 2019. "Dynamic supplier selection and lot-sizing problem considering carbon emissions in a big data environment," Technological Forecasting and Social Change, Elsevier, vol. 144(C), pages 573-584.
    3. Samuel Yousefi & Mustafa Jahangoshai Rezaee & Maghsud Solimanpur, 2021. "Supplier selection and order allocation using two-stage hybrid supply chain model and game-based order price," Operational Research, Springer, vol. 21(1), pages 553-588, March.
    4. Rezaei, Jafar & Salimi, Negin, 2012. "Economic order quantity and purchasing price for items with imperfect quality when inspection shifts from buyer to supplier," International Journal of Production Economics, Elsevier, vol. 137(1), pages 11-18.
    5. Bruno, Giuseppe & Genovese, Andrea & Piccolo, Carmela, 2014. "The capacitated Lot Sizing model: A powerful tool for logistics decision making," International Journal of Production Economics, Elsevier, vol. 155(C), pages 380-390.
    6. Firouz, Mohammad & Keskin, Burcu B. & Melouk, Sharif H., 2017. "An integrated supplier selection and inventory problem with multi-sourcing and lateral transshipments," Omega, Elsevier, vol. 70(C), pages 77-93.
    7. Irfan Ali & Armin Fügenschuh & Srikant Gupta & Umar Muhammad Modibbo, 2020. "The LR-Type Fuzzy Multi-Objective Vendor Selection Problem in Supply Chain Management," Mathematics, MDPI, vol. 8(9), pages 1-25, September.
    8. Vargas, Vicente & Metters, Richard, 2011. "A master production scheduling procedure for stochastic demand and rolling planning horizons," International Journal of Production Economics, Elsevier, vol. 132(2), pages 296-302, August.
    9. Rezaei, Jafar & Ortt, Roland, 2013. "Multi-criteria supplier segmentation using a fuzzy preference relations based AHP," European Journal of Operational Research, Elsevier, vol. 225(1), pages 75-84.
    10. Büyüközkan, Gülçin & Güleryüz, Sezin & Karpak, Birsen, 2017. "A new combined IF-DEMATEL and IF-ANP approach for CRM partner evaluation," International Journal of Production Economics, Elsevier, vol. 191(C), pages 194-206.
    11. Congjun Rao & Mark Goh & Junjun Zheng, 2017. "Decision Mechanism for Supplier Selection Under Sustainability," International Journal of Information Technology & Decision Making (IJITDM), World Scientific Publishing Co. Pte. Ltd., vol. 16(01), pages 87-115, January.
    12. Oliveira, Washington A. & Fiorotto, Diego J. & Song, Xiang & Jones, Dylan F., 2021. "An extended goal programming model for the multiobjective integrated lot-sizing and cutting stock problem," European Journal of Operational Research, Elsevier, vol. 295(3), pages 996-1007.
    13. Guillermo Cabrera-Guerrero & Matthias Ehrgott & Andrew J. Mason & Andrea Raith, 2022. "Bi-objective optimisation over a set of convex sub-problems," Annals of Operations Research, Springer, vol. 319(2), pages 1507-1532, December.
    14. Wilco van den Heuvel & Semra Ağralı & Z. Caner Taşkın, 2023. "A Decomposition Algorithm for Single and Multiobjective Integrated Market Selection and Production Planning," INFORMS Journal on Computing, INFORMS, vol. 35(6), pages 1439-1453, November.
    15. Marwa F. Mohamed & Mohamed Meselhy Eltoukhy & Khalil Al Ruqeishi & Ahmad Salah, 2023. "An Adapted Multi-Objective Genetic Algorithm for Healthcare Supplier Selection Decision," Mathematics, MDPI, vol. 11(6), pages 1-14, March.
    16. Yajaira Cardona-Valdés & Samuel Nucamendi-Guillén & Rodrigo E. Peimbert-García & Gustavo Macedo-Barragán & Eduardo Díaz-Medina, 2020. "A New Formulation for the Capacitated Lot Sizing Problem with Batch Ordering Allowing Shortages," Mathematics, MDPI, vol. 8(6), pages 1-16, June.
    17. Gabriel Amaro & Diego Jacinto Fiorotto & Washington Alves Oliveira, 2023. "Impact analysis of flexibility on the integrated lot sizing and supplier selection problem," TOP: An Official Journal of the Spanish Society of Statistics and Operations Research, Springer;Sociedad de Estadística e Investigación Operativa, vol. 31(1), pages 236-266, April.
    18. Hosseini, Seyedmohsen & Barker, Kash, 2016. "A Bayesian network model for resilience-based supplier selection," International Journal of Production Economics, Elsevier, vol. 180(C), pages 68-87.
    19. Gupta, Vishal Kumar & Ting, Q.U. & Tiwari, Manoj Kumar, 2019. "Multi-period price optimization problem for omnichannel retailers accounting for customer heterogeneity," International Journal of Production Economics, Elsevier, vol. 212(C), pages 155-167.
    20. Tavana, Madjid & Di Caprio, Debora, 2016. "Modeling synergies in multi-criteria supplier selection and order allocation: An application to commodity tradingAuthor-Name: Sodenkamp, Mariya A," European Journal of Operational Research, Elsevier, vol. 254(3), pages 859-874.
    21. Bozorgi, Ali & Pazour, Jennifer & Nazzal, Dima, 2014. "A new inventory model for cold items that considers costs and emissions," International Journal of Production Economics, Elsevier, vol. 155(C), pages 114-125.
    22. Federico Toffano & Michele Garraffa & Yiqing Lin & Steven Prestwich & Helmut Simonis & Nic Wilson, 2022. "A multi-objective supplier selection framework based on user-preferences," Annals of Operations Research, Springer, vol. 308(1), pages 609-640, January.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Brahimi, Nadjib & Absi, Nabil & Dauzère-Pérès, Stéphane & Nordli, Atle, 2017. "Single-item dynamic lot-sizing problems: An updated survey," European Journal of Operational Research, Elsevier, vol. 263(3), pages 838-863.
    2. Farhat, Mlouka & Akbalik, Ayse & Hadj-Alouane, Atidel B. & Sauer, Nathalie, 2019. "Lot sizing problem with batch ordering under periodic buyback contract and lost sales," International Journal of Production Economics, Elsevier, vol. 208(C), pages 500-511.
    3. Brahimi, Nadjib & Dauzere-Peres, Stephane & Najid, Najib M. & Nordli, Atle, 2006. "Single item lot sizing problems," European Journal of Operational Research, Elsevier, vol. 168(1), pages 1-16, January.
    4. Aly Owida & P.J. Byrne & Cathal Heavey & Paul Blake & Khaled S. El-Kilany, 2016. "A simulation based continuous improvement approach for manufacturing based field repair service contracting," International Journal of Production Research, Taylor & Francis Journals, vol. 54(21), pages 6458-6477, November.
    5. Fink, Jiří & Hurink, Johann L., 2015. "Minimizing costs is easier than minimizing peaks when supplying the heat demand of a group of houses," European Journal of Operational Research, Elsevier, vol. 242(2), pages 644-650.
    6. Petering, Matthew E.H. & Chen, Xi & Hsieh, Wen-Huan, 2019. "Inventory control with flexible demand: Cyclic case with multiple batch supply and demand processes," International Journal of Production Economics, Elsevier, vol. 212(C), pages 60-77.
    7. Zhang, Zhi-Hai & Jiang, Hai & Pan, Xunzhang, 2012. "A Lagrangian relaxation based approach for the capacitated lot sizing problem in closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 140(1), pages 249-255.
    8. Akbalik, Ayse & Hadj-Alouane, Atidel B. & Sauer, Nathalie & Ghribi, Houcem, 2017. "NP-hard and polynomial cases for the single-item lot sizing problem with batch ordering under capacity reservation contract," European Journal of Operational Research, Elsevier, vol. 257(2), pages 483-493.
    9. Saravanan Venkatachalam & Arunachalam Narayanan, 2016. "Efficient formulation and heuristics for multi-item single source ordering problem with transportation cost," International Journal of Production Research, Taylor & Francis Journals, vol. 54(14), pages 4087-4103, July.
    10. Jans, Raf & Degraeve, Zeger, 2007. "Meta-heuristics for dynamic lot sizing: A review and comparison of solution approaches," European Journal of Operational Research, Elsevier, vol. 177(3), pages 1855-1875, March.
    11. Fleischhacker, Adam J. & Zhao, Yao, 2011. "Planning for demand failure: A dynamic lot size model for clinical trial supply chains," European Journal of Operational Research, Elsevier, vol. 211(3), pages 496-506, June.
    12. Koca, Esra & Yaman, Hande & Selim Aktürk, M., 2015. "Stochastic lot sizing problem with controllable processing times," Omega, Elsevier, vol. 53(C), pages 1-10.
    13. Mafakheri, Fereshteh & Breton, Michele & Ghoniem, Ahmed, 2011. "Supplier selection-order allocation: A two-stage multiple criteria dynamic programming approach," International Journal of Production Economics, Elsevier, vol. 132(1), pages 52-57, July.
    14. Rossi, Tommaso & Pozzi, Rossella & Testa, Mariapaola, 2017. "EOQ-based inventory management in single-machine multi-item systems," Omega, Elsevier, vol. 71(C), pages 106-113.
    15. Ming Zhao & Minjiao Zhang, 2020. "Multiechelon Lot Sizing: New Complexities and Inequalities," Operations Research, INFORMS, vol. 68(2), pages 534-551, March.
    16. Stan van Hoesel & H. Edwin Romeijn & Dolores Romero Morales & Albert P. M. Wagelmans, 2005. "Integrated Lot Sizing in Serial Supply Chains with Production Capacities," Management Science, INFORMS, vol. 51(11), pages 1706-1719, November.
    17. Melega, Gislaine Mara & de Araujo, Silvio Alexandre & Jans, Raf, 2018. "Classification and literature review of integrated lot-sizing and cutting stock problems," European Journal of Operational Research, Elsevier, vol. 271(1), pages 1-19.
    18. Drexl, A. & Kimms, A., 1997. "Lot sizing and scheduling -- Survey and extensions," European Journal of Operational Research, Elsevier, vol. 99(2), pages 221-235, June.
    19. Lin, Rong-Ho, 2012. "An integrated model for supplier selection under a fuzzy situation," International Journal of Production Economics, Elsevier, vol. 138(1), pages 55-61.
    20. Atamturk, Alper & Munoz, Juan Carlos, 2002. "A Study of the Lot-Sizing Polytope," University of California Transportation Center, Working Papers qt6zz2g0z4, University of California Transportation Center.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:130:y:2011:i:1:p:77-86. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.