IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v87y2010i7p2203-2211.html
   My bibliography  Save this article

Tar removal from biomass pyrolysis gas in two-step function of decomposition and adsorption

Author

Listed:
  • Phuphuakrat, Thana
  • Namioka, Tomoaki
  • Yoshikawa, Kunio

Abstract

Tar content in syngas pyrolysis is a serious problem for fuel gas utilization in downstream applications. This paper investigated tar removal, by the two-step function of decomposition and adsorption, from the pyrolysis gas. The temperature of the tar decomposition process was fixed at 800 °C both with and without steam, with air as the reforming agent. Both steam and air had a strong influence on the tar decomposition reaction. The reduction of the gravimetric tar mass was 78% in the case of the thermal cracking, whereas, it was in the range of 77-92% in the case of the steam and air forming. Under conditions of tar decomposition, the gravimetric tar mass reduced, while the yield of the combustible gaseous components in the syngas increased. Synchronously, the amount of light tars increased. This should be eliminated later by fixed-bed adsorption. Three adsorbents (activated carbon, wood chip, and synthetic porous cordierite) were selected to evaluate the adsorption performance of light tars, especially of condensable tar. Activated carbon showed the best adsorption performance among all light tars, in view of the adsorption capacity and breakthrough time. On the other hand, activated carbon decreased the efficiency of the system due to its high adsorption performance with non-condensable tar, which is a combustible substance in syngas. Synthetic porous cordierite showed very low adsorption performance with almost all light tars, whereas, wood chip showed a high adsorption performance with condensable tar and low adsorption performance with non-condensable tar. When compared with other adsorbents, wood chip showed a prominent adsorption selectivity that was suitable for practical use, by minimizing the condensable tar without decreasing the efficiency of the system.

Suggested Citation

  • Phuphuakrat, Thana & Namioka, Tomoaki & Yoshikawa, Kunio, 2010. "Tar removal from biomass pyrolysis gas in two-step function of decomposition and adsorption," Applied Energy, Elsevier, vol. 87(7), pages 2203-2211, July.
    • Handle: RePEc:eee:appene:v:87:y:2010:i:7:p:2203-2211
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306-2619(09)00525-X
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Li, Chunshan & Suzuki, Kenzi, 2009. "Tar property, analysis, reforming mechanism and model for biomass gasification--An overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(3), pages 594-604, April.
    2. Han, Jun & Kim, Heejoon, 2008. "The reduction and control technology of tar during biomass gasification/pyrolysis: An overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 12(2), pages 397-416, February.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Du, Shilin & Shu, Rui & Guo, Feiqiang & Mao, Songbo & Bai, Jiaming & Qian, Lin & Xin, Chengyun, 2022. "Porous coal char-based catalyst from coal gangue and lignite with high metal contents in the catalytic cracking of biomass tar," Energy, Elsevier, vol. 249(C).
    2. Nicola Aldi & Nicola Casari & Michele Pinelli & Alessio Suman & Alessandro Vulpio, 2022. "Performance Degradation of a Shell-and-Tube Heat Exchanger Due to Tar Deposition," Energies, MDPI, vol. 15(4), pages 1-16, February.
    3. Guan, Guoqing & Kaewpanha, Malinee & Hao, Xiaogang & Abudula, Abuliti, 2016. "Catalytic steam reforming of biomass tar: Prospects and challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 58(C), pages 450-461.
    4. Ud Din, Zia & Zainal, Z.A., 2016. "Biomass integrated gasification–SOFC systems: Technology overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 1356-1376.
    5. Huang, Zhen & Zheng, Anqing & Deng, Zhengbing & Wei, Guoqiang & Zhao, Kun & Chen, Dezhen & He, Fang & Zhao, Zengli & Li, Haibin & Li, Fanxing, 2020. "In-situ removal of toluene as a biomass tar model compound using NiFe2O4 for application in chemical looping gasification oxygen carrier," Energy, Elsevier, vol. 190(C).
    6. Ud Din, Zia & Zainal, Z.A., 2017. "The fate of SOFC anodes under biomass producer gas contaminants," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 1050-1066.
    7. Rakesh N, & Dasappa, S., 2018. "A critical assessment of tar generated during biomass gasification - Formation, evaluation, issues and mitigation strategies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 91(C), pages 1045-1064.
    8. Anis, Samsudin & Zainal, Z.A., 2011. "Tar reduction in biomass producer gas via mechanical, catalytic and thermal methods: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(5), pages 2355-2377, June.
    9. Shen, Yafei, 2015. "Chars as carbonaceous adsorbents/catalysts for tar elimination during biomass pyrolysis or gasification," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 281-295.
    10. Sun, Jing & Wang, Qing & Wang, Wenlong & Wang, Ke, 2018. "Study on the synergism of steam reforming and photocatalysis for the degradation of Toluene as a tar model compound under microwave-metal discharges," Energy, Elsevier, vol. 155(C), pages 815-823.
    11. Hu, Fu-Xiang & Yang, Guo-Hua & Ding, Guo-Zhu & Li, Zhen & Du, Ka-Shuai & Hu, Zhi-Fa & Tian, Su-Rui, 2016. "Experimental study on catalytic cracking of model tar compounds in a dual layer granular bed filter," Applied Energy, Elsevier, vol. 170(C), pages 47-57.
    12. Font Palma, Carolina, 2013. "Modelling of tar formation and evolution for biomass gasification: A review," Applied Energy, Elsevier, vol. 111(C), pages 129-141.
    13. Nakamura, Shunsuke & Kitano, Shigeru & Yoshikawa, Kunio, 2016. "Biomass gasification process with the tar removal technologies utilizing bio-oil scrubber and char bed," Applied Energy, Elsevier, vol. 170(C), pages 186-192.
    14. Hernández, J.J. & Ballesteros, R. & Aranda, G., 2013. "Characterisation of tars from biomass gasification: Effect of the operating conditions," Energy, Elsevier, vol. 50(C), pages 333-342.
    15. Kafle, Sagar & Euh, Seung Hee & Cho, Lahoon & Nam, Yun Seong & Oh, Kwang Cheol & Choi, Yun Sung & Oh, Jae-Heun & Kim, Dae Hyun, 2017. "Tar fouling reduction in wood pellet boiler using additives and study the effects of additives on the characteristics of pellets," Energy, Elsevier, vol. 129(C), pages 79-85.
    16. Cheng Yang & Kanfeng Ying & Fan Yang & Huanghu Peng & Zezhou Chen, 2022. "Simulation on the Electric and Thermal Fields of a Microwave Reactor for Ex Situ Biomass Tar Elimination," Energies, MDPI, vol. 15(11), pages 1-12, June.
    17. Kotowicz, Janusz & Sobolewski, Aleksander & Iluk, Tomasz, 2013. "Energetic analysis of a system integrated with biomass gasification," Energy, Elsevier, vol. 52(C), pages 265-278.
    18. Ahmed, A.M.A & Salmiaton, A. & Choong, T.S.Y & Wan Azlina, W.A.K.G., 2015. "Review of kinetic and equilibrium concepts for biomass tar modeling by using Aspen Plus," Renewable and Sustainable Energy Reviews, Elsevier, vol. 52(C), pages 1623-1644.
    19. Damartzis, T. & Zabaniotou, A., 2011. "Thermochemical conversion of biomass to second generation biofuels through integrated process design--A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(1), pages 366-378, January.
    20. Martínez-Lera, Susana & Pallarés Ranz, Javier, 2016. "On the development of a wood gasification modelling approach with special emphasis on primary devolatilization and tar formation and destruction phenomena," Energy, Elsevier, vol. 113(C), pages 643-652.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:87:y:2010:i:7:p:2203-2211. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.