IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v87y2010i2p541-550.html
   My bibliography  Save this article

Thermal performance of linear Fresnel reflecting solar concentrator with trapezoidal cavity absorbers

Author

Listed:
  • Singh, Panna Lal
  • Sarviya, R.M.
  • Bhagoria, J.L.

Abstract

Thermal performance of the four identical trapezoidal cavity absorbers for linear Fresnel reflecting solar device were studied and compared. The absorbers were designed for operating in conjunction with a prototype Fresnel solar reflector. Rectangular and round pipe sections were used as absorber by placing in the trapezoidal cavity. The absorber pipes were coated with ordinary dull black board paint and black nickel selective surface. The bottom of the cavity was provided with plane glass to allow the solar radiation to be reflected from the Fresnel reflector. The other three sides of the cavity absorber were insulated to reduce heat loss. Thermal performance of the Fresnel reflecting concentrator with each trapezoidal cavity absorber was studied experimentally at different concentration ratio of the reflector. The study revealed that the thermal efficiency was influenced by the concentration ratio and selective surface coating on the absorber. The thermal efficiency decreased with the increase in the concentration ratio of the Fresnel reflecting collector. The selective surface coated absorber had a significant advantage in terms of superior thermal performance as compared to ordinary black painted absorber. The round pipe (multi-tube) receiver had higher surface area to absorb solar energy as compared to rectangular pipe receiver. Thermal efficiency of the solar device with round pipe absorber was found higher (up to 8%) as compared to rectangular pipe absorber.

Suggested Citation

  • Singh, Panna Lal & Sarviya, R.M. & Bhagoria, J.L., 2010. "Thermal performance of linear Fresnel reflecting solar concentrator with trapezoidal cavity absorbers," Applied Energy, Elsevier, vol. 87(2), pages 541-550, February.
    • Handle: RePEc:eee:appene:v:87:y:2010:i:2:p:541-550
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306-2619(09)00355-9
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sharma, M. S. & Mathur, S. S. & Singh, R. N., 1983. "Performance analysis of a linear solar concentrator under different flow regimes," Applied Energy, Elsevier, vol. 13(1), pages 77-81, January.
    2. Choudhury, C. & Sehgal, H.K., 1986. "A fresnel strip reflector-concentrator for tubular solar-energy collectors," Applied Energy, Elsevier, vol. 23(2), pages 143-154.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Flores Larsen, S. & Altamirano, M. & Hernández, A., 2012. "Heat loss of a trapezoidal cavity absorber for a linear Fresnel reflecting solar concentrator," Renewable Energy, Elsevier, vol. 39(1), pages 198-206.
    2. Roostaee, Amin & Ameri, Mehran, 2019. "Effect of Linear Fresnel Concentrators field key parameters on reflectors configuration, Trapezoidal Cavity Receiver dimension, and heat loss," Renewable Energy, Elsevier, vol. 134(C), pages 1447-1464.
    3. Vouros, Alexandros & Mathioulakis, Emmanouil & Papanicolaou, Elias & Belessiotis, Vassilis, 2020. "Performance evaluation of a linear Fresnel collector with catoptric subsets," Renewable Energy, Elsevier, vol. 156(C), pages 68-83.
    4. Sait, Hani H. & Martinez-Val, Jose M. & Abbas, Ruben & Munoz-Anton, Javier, 2015. "Fresnel-based modular solar fields for performance/cost optimization in solar thermal power plants: A comparison with parabolic trough collectors," Applied Energy, Elsevier, vol. 141(C), pages 175-189.
    5. Abbas, R. & Muñoz, J. & Martínez-Val, J.M., 2012. "Steady-state thermal analysis of an innovative receiver for linear Fresnel reflectors," Applied Energy, Elsevier, vol. 92(C), pages 503-515.
    6. Manikumar, R. & Valan Arasu, A., 2014. "Heat loss characteristics study of a trapezoidal cavity absorber with and without plate for a linear Fresnel reflector solar concentrator system," Renewable Energy, Elsevier, vol. 63(C), pages 98-108.
    7. Reddy, K.S. & Balaji, Shanmugapriya & Sundararajan, T., 2018. "Estimation of heat losses due to wind effects from linear parabolic secondary reflector –receiver of solar LFR module," Energy, Elsevier, vol. 150(C), pages 410-433.
    8. Abbas, R. & Martínez-Val, J.M., 2015. "Analytic optical design of linear Fresnel collectors with variable widths and shifts of mirrors," Renewable Energy, Elsevier, vol. 75(C), pages 81-92.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:87:y:2010:i:2:p:541-550. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.