IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v85y2008i7p589-606.html
   My bibliography  Save this article

Simulation for the analysis of a hybrid electric scooter powertrain

Author

Listed:
  • Sheu, Kuen-Bao

Abstract

This paper describes the mathematical modelling, analysis and simulation of a novel hybrid powertrain used in a scooter. The primary feature of the proposed hybrid powertrain is the use of a split power-system that consists of a one-degree-of-freedom (dof) planetary gear-train (PGT) and a two-dof PGT to combine the power of two sources, a gasoline engine and an electric motor. Detailed component level models for the hybrid electric scooter are established using the Matlab/Simulink environment. A simple rule-based power control strategy is then established with the primary objective to optimize the fuel economy of the hybrid electric scooter. The performance of the proposed hybrid powertrain is studied using the developed model under four driving cycles. The simulation results verify the operational capabilities of the proposed hybrid system and show both the engine and the electric motor work in an optimal state under various operating conditions.

Suggested Citation

  • Sheu, Kuen-Bao, 2008. "Simulation for the analysis of a hybrid electric scooter powertrain," Applied Energy, Elsevier, vol. 85(7), pages 589-606, July.
  • Handle: RePEc:eee:appene:v:85:y:2008:i:7:p:589-606
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306-2619(07)00144-4
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sheu, Kuen-Bao & Hsu, Tsung-Hua, 2006. "Design and implementation of a novel hybrid-electric-motorcycle transmission," Applied Energy, Elsevier, vol. 83(9), pages 959-974, September.
    2. Tzeng, Sheng-Chung & David Huang, K. & Chen, Chia-Chang, 2005. "Optimization of the dual energy-integration mechanism in a parallel-type hybrid vehicle," Applied Energy, Elsevier, vol. 80(3), pages 225-245, March.
    3. Sheu, Kuen-Bao, 2007. "Conceptual design of hybrid scooter transmissions with planetary gear-trains," Applied Energy, Elsevier, vol. 84(5), pages 526-541, May.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Hung, Yi-Hsuan & Wu, Chien-Hsun, 2012. "An integrated optimization approach for a hybrid energy system in electric vehicles," Applied Energy, Elsevier, vol. 98(C), pages 479-490.
    2. Chien-Hsun Wu & Yong-Xiang Xu, 2019. "The Optimal Control of Fuel Consumption for a Heavy-Duty Motorcycle with Three Power Sources Using Hardware-in-the-Loop Simulation," Energies, MDPI, vol. 13(1), pages 1-16, December.
    3. Hsu, Yuan-Yong & Lu, Shao-Yuan, 2010. "Design and implementation of a hybrid electric motorcycle management system," Applied Energy, Elsevier, vol. 87(11), pages 3546-3551, November.
    4. Hu, Xiaosong & Murgovski, Nikolce & Johannesson, Lars & Egardt, Bo, 2013. "Energy efficiency analysis of a series plug-in hybrid electric bus with different energy management strategies and battery sizes," Applied Energy, Elsevier, vol. 111(C), pages 1001-1009.
    5. Walker, Paul D. & Roser, Holger M., 2015. "Energy consumption and cost analysis of hybrid electric powertrain configurations for two wheelers," Applied Energy, Elsevier, vol. 146(C), pages 279-287.
    6. Finesso, Roberto & Spessa, Ezio & Venditti, Mattia, 2016. "Cost-optimized design of a dual-mode diesel parallel hybrid electric vehicle for several driving missions and market scenarios," Applied Energy, Elsevier, vol. 177(C), pages 366-383.
    7. Hung, Yi-Hsuan & Wu, Chien-Hsun, 2015. "A combined optimal sizing and energy management approach for hybrid in-wheel motors of EVs," Applied Energy, Elsevier, vol. 139(C), pages 260-271.
    8. David Huang, K. & Quang, Khong Vu & Tseng, Kuo-Tung, 2009. "Study of the effect of contraction of cross-sectional area on flow energy merger in hybrid pneumatic power system," Applied Energy, Elsevier, vol. 86(10), pages 2171-2182, October.
    9. Cipek, Mihael & Pavković, Danijel & Petrić, Joško, 2013. "A control-oriented simulation model of a power-split hybrid electric vehicle," Applied Energy, Elsevier, vol. 101(C), pages 121-133.
    10. Katrasnik, Tomaz, 2010. "Analytical method to evaluate fuel consumption of hybrid electric vehicles at balanced energy content of the electric storage devices," Applied Energy, Elsevier, vol. 87(11), pages 3330-3339, November.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hung, Yi-Hsuan & Wu, Chien-Hsun, 2015. "A combined optimal sizing and energy management approach for hybrid in-wheel motors of EVs," Applied Energy, Elsevier, vol. 139(C), pages 260-271.
    2. Hung, Yi-Hsuan & Tung, Yu-Ming & Chang, Chun-Hsin, 2016. "Optimal control of integrated energy management/mode switch timing in a three-power-source hybrid powertrain," Applied Energy, Elsevier, vol. 173(C), pages 184-196.
    3. Peng, Zhijun & Wang, Tianyou & He, Yongling & Yang, Xiaoyi & Lu, Lipeng, 2013. "Analysis of environmental and economic benefits of integrated Exhaust Energy Recovery (EER) for vehicles," Applied Energy, Elsevier, vol. 105(C), pages 238-243.
    4. Finesso, Roberto & Spessa, Ezio & Venditti, Mattia, 2016. "Cost-optimized design of a dual-mode diesel parallel hybrid electric vehicle for several driving missions and market scenarios," Applied Energy, Elsevier, vol. 177(C), pages 366-383.
    5. Hsu, Yuan-Yong & Lu, Shao-Yuan, 2010. "Design and implementation of a hybrid electric motorcycle management system," Applied Energy, Elsevier, vol. 87(11), pages 3546-3551, November.
    6. Hou, Cong & Ouyang, Minggao & Xu, Liangfei & Wang, Hewu, 2014. "Approximate Pontryagin’s minimum principle applied to the energy management of plug-in hybrid electric vehicles," Applied Energy, Elsevier, vol. 115(C), pages 174-189.
    7. Shen, Yu-Ta & Hwang, Yean-Ren, 2009. "Design and implementation of an air-powered motorcycles," Applied Energy, Elsevier, vol. 86(7-8), pages 1105-1110, July.
    8. Cheng-Ta Chung & Chien-Hsun Wu & Yi-Hsuan Hung, 2018. "Effects of Electric Circulation on the Energy Efficiency of the Power Split e-CVT Hybrid Systems," Energies, MDPI, vol. 11(9), pages 1-15, September.
    9. Chung, Cheng-Ta & Hung, Yi-Hsuan, 2015. "Performance and energy management of a novel full hybrid electric powertrain system," Energy, Elsevier, vol. 89(C), pages 626-636.
    10. Walker, Paul D. & Roser, Holger M., 2015. "Energy consumption and cost analysis of hybrid electric powertrain configurations for two wheelers," Applied Energy, Elsevier, vol. 146(C), pages 279-287.
    11. David Huang, K. & Quang, Khong Vu & Tseng, Kuo-Tung, 2009. "Study of the effect of contraction of cross-sectional area on flow energy merger in hybrid pneumatic power system," Applied Energy, Elsevier, vol. 86(10), pages 2171-2182, October.
    12. Hung, Yi-Hsuan & Wu, Chien-Hsun, 2012. "An integrated optimization approach for a hybrid energy system in electric vehicles," Applied Energy, Elsevier, vol. 98(C), pages 479-490.
    13. Amjad, Shaik & Rudramoorthy, R. & Neelakrishnan, S. & Sri Raja Varman, K. & Arjunan, T.V., 2011. "Evaluation of energy requirements for all-electric range of plug-in hybrid electric two-wheeler," Energy, Elsevier, vol. 36(3), pages 1623-1629.
    14. Chien-Hsun Wu & Yong-Xiang Xu, 2019. "The Optimal Control of Fuel Consumption for a Heavy-Duty Motorcycle with Three Power Sources Using Hardware-in-the-Loop Simulation," Energies, MDPI, vol. 13(1), pages 1-16, December.
    15. Chung, Cheng-Ta & Wu, Chien-Hsun & Hung, Yi-Hsuan, 2021. "A design methodology for selecting energy-efficient compound split e-CVT hybrid systems with planetary gearsets based on electric circulation," Energy, Elsevier, vol. 230(C).
    16. Chung, Cheng-Ta & Wu, Chien-Hsun & Hung, Yi-Hsuan, 2020. "Evaluation of driving performance and energy efficiency for a novel full hybrid system with dual-motor electric drive and integrated input- and output-split e-CVT," Energy, Elsevier, vol. 191(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:85:y:2008:i:7:p:589-606. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.