IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v116y2014icp387-397.html
   My bibliography  Save this article

Heat recovery opportunities in UK industry

Author

Listed:
  • Hammond, G.P.
  • Norman, J.B.

Abstract

A database of the heat demand, and surplus heat available, at United Kingdom industrial sites involved in the European Union Emissions Trading System, was used to estimate the technical potential of various heat recovery technologies. The options considered were recovery for use on-site, using heat exchangers; upgrading the heat to a higher temperature, using heat pumps; conversion of the heat energy to fulfill a chilling demand, using absorption chillers; conversion of the heat energy to electrical energy, using Rankine cycles; and transport of the heat to fulfill an off-site heat demand. A broad analysis of this type, which investigates a large number of sites, cannot accurately identify site level opportunities. However the analysis can provide an indicative assessment of the overall potential for different technologies. The greatest potential for reusing this surplus heat was found to be recovery at low temperatures, utilising heat exchangers; and in conversion to electricity, mostly using organic Rankine cycle technology. Both these technologies exist in commercial applications, but are not well established, support for their development and installation could increase their use. The overall surplus heat that was technically recoverable using a combination of these technologies was estimated at 52PJ/yr, saving 2.2MtCO2e/yr in comparison to supplying the energy outputs in a conventional manner. It is thought that a network and market for trading in heat and the wider use of district heating systems could open considerable potential for exporting heat from industrial sites to other users.

Suggested Citation

  • Hammond, G.P. & Norman, J.B., 2014. "Heat recovery opportunities in UK industry," Applied Energy, Elsevier, vol. 116(C), pages 387-397.
  • Handle: RePEc:eee:appene:v:116:y:2014:i:c:p:387-397
    DOI: 10.1016/j.apenergy.2013.11.008
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S030626191300901X
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2013.11.008?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Rohdin, P. & Thollander, P., 2006. "Barriers to and driving forces for energy efficiency in the non-energy intensive manufacturing industry in Sweden," Energy, Elsevier, vol. 31(12), pages 1836-1844.
    2. McKenna, R.C. & Norman, J.B., 2010. "Spatial modelling of industrial heat loads and recovery potentials in the UK," Energy Policy, Elsevier, vol. 38(10), pages 5878-5891, October.
    3. Daan van Soest & Erwin Bulte, 2001. "Does the Energy-Efficiency Paradox Exist? Technological Progress and Uncertainty," Environmental & Resource Economics, Springer;European Association of Environmental and Resource Economists, vol. 18(1), pages 101-112, January.
    4. Ma, Q. & Luo, L. & Wang, R.Z. & Sauce, G., 2009. "A review on transportation of heat energy over long distance: Exploratory development," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(6-7), pages 1532-1540, August.
    5. van Gool, W., 1987. "The value of energy carriers," Energy, Elsevier, vol. 12(6), pages 509-518.
    6. DeCanio, Stephen J., 1993. "Barriers within firms to energy-efficient investments," Energy Policy, Elsevier, vol. 21(9), pages 906-914, September.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chen, Q. & Hammond, G.P. & Norman, J.B., 2016. "Energy efficiency potentials: Contrasting thermodynamic, technical and economic limits for organic Rankine cycles within UK industry," Applied Energy, Elsevier, vol. 164(C), pages 984-990.
    2. Todd D. Gerarden & Richard G. Newell & Robert N. Stavins, 2017. "Assessing the Energy-Efficiency Gap," Journal of Economic Literature, American Economic Association, vol. 55(4), pages 1486-1525, December.
    3. Häckel, Björn & Pfosser, Stefan & Tränkler, Timm, 2017. "Explaining the energy efficiency gap - Expected Utility Theory versus Cumulative Prospect Theory," Energy Policy, Elsevier, vol. 111(C), pages 414-426.
    4. Lawrence, Akvile & Karlsson, Magnus & Nehler, Therese & Thollander, Patrik, 2019. "Effects of monetary investment, payback time and firm characteristics on electricity saving in energy-intensive industry," Applied Energy, Elsevier, vol. 240(C), pages 499-512.
    5. Dyer, Caroline H. & Hammond, Geoffrey P. & Jones, Craig I. & McKenna, Russell C., 2008. "Enabling technologies for industrial energy demand management," Energy Policy, Elsevier, vol. 36(12), pages 4434-4443, December.
    6. Kavvadias, Konstantinos C. & Quoilin, Sylvain, 2018. "Exploiting waste heat potential by long distance heat transmission: Design considerations and techno-economic assessment," Applied Energy, Elsevier, vol. 216(C), pages 452-465.
    7. Hochman, Gal & Timilsina, Govinda R., 2017. "Energy efficiency barriers in commercial and industrial firms in Ukraine: An empirical analysis," Energy Economics, Elsevier, vol. 63(C), pages 22-30.
    8. Liu, Xianbing & Niu, Dongjie & Bao, Cunkuan & Suk, Sunhee & Sudo, Kinichi, 2013. "Affordability of energy cost increases for companies due to market-based climate policies: A survey in Taicang, China," Applied Energy, Elsevier, vol. 102(C), pages 1464-1476.
    9. Trianni, Andrea & Cagno, Enrico & De Donatis, Alessio, 2014. "A framework to characterize energy efficiency measures," Applied Energy, Elsevier, vol. 118(C), pages 207-220.
    10. Rockstuhl, Sebastian & Wenninger, Simon & Wiethe, Christian & Häckel, Björn, 2021. "Understanding the risk perception of energy efficiency investments: Investment perspective vs. energy bill perspective," Energy Policy, Elsevier, vol. 159(C).
    11. Kounetas, Kostas & Tsekouras, Kostas, 2010. "Are the Energy Efficiency Technologies efficient?," Economic Modelling, Elsevier, vol. 27(1), pages 274-283, January.
    12. Backlund, Sandra & Thollander, Patrik & Palm, Jenny & Ottosson, Mikael, 2012. "Extending the energy efficiency gap," Energy Policy, Elsevier, vol. 51(C), pages 392-396.
    13. Marta Daroń & Monika Górska, 2023. "Relationships between Selected Quality Tools and Energy Efficiency in Production Processes," Energies, MDPI, vol. 16(13), pages 1-20, June.
    14. Kounetas, Kostas & Tsekouras, Kostas, 2008. "The energy efficiency paradox revisited through a partial observability approach," Energy Economics, Elsevier, vol. 30(5), pages 2517-2536, September.
    15. Timilsina, Govinda R. & Hochman, Gal & Fedets, Iryna, 2016. "Understanding energy efficiency barriers in Ukraine: Insights from a survey of commercial and industrial firms," Energy, Elsevier, vol. 106(C), pages 203-211.
    16. Accordini, D. & Cagno, E. & Trianni, A., 2021. "Identification and characterization of decision-making factors over industrial energy efficiency measures in electric motor systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 149(C).
    17. Paul W. Griffin & Geoffrey P. Hammond & Jonathan B. Norman, 2016. "Industrial energy use and carbon emissions reduction: a UK perspective," Wiley Interdisciplinary Reviews: Energy and Environment, Wiley Blackwell, vol. 5(6), pages 684-714, November.
    18. Fredrik Backman, 2017. "Barriers to Energy Efficiency in Swedish Non-Energy-Intensive Micro- and Small-Sized Enterprises—A Case Study of a Local Energy Program," Energies, MDPI, vol. 10(1), pages 1-13, January.
    19. Therkelsen, Peter & McKane, Aimee, 2013. "Implementation and rejection of industrial steam system energy efficiency measures," Energy Policy, Elsevier, vol. 57(C), pages 318-328.
    20. Cagno, E. & Worrell, E. & Trianni, A. & Pugliese, G., 2013. "A novel approach for barriers to industrial energy efficiency," Renewable and Sustainable Energy Reviews, Elsevier, vol. 19(C), pages 290-308.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:116:y:2014:i:c:p:387-397. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.