IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v114y2014icp724-734.html
   My bibliography  Save this article

Multi-zone modeling and simulation of syngas combustion under laminar conditions

Author

Listed:
  • Monteiro, Eliseu
  • Rouboa, Abel
  • Bellenoue, Marc
  • Boust, Bastien
  • Sotton, Julien

Abstract

The use of laminar models has been generally accepted, as quench distances in engines and the distances obtained for laminar flame quench calculations could be well correlated. In this work a multi-zone model is presented in order to derive the quenching distance and heat flux in laminar syngas–air flames based on recent developments in the science of combustion. Three typical mixtures of H2, CO, CH4, CO2 and N2 have been considered as representative of the syngas coming from wood gasification, and its laminar combustion is made in a static spherical vessel. The model is validated for the methane–air case and then applied to syngas–air mixtures in order to estimate the heat flux to the walls and quenching distances. Two wall heat transfer models are implemented and compared. The classical Woschni model based on the hypotheses of forced convection and the Rivère model based on kinetic theory of gases. Conclusion could be drawn that the Rivère heat transfer model is capable to better reproduce the heat flux to the walls. Heat flux through the walls is higher for stoichiometric syngas–air mixtures which follows the same behavior of the pressure inside the combustion vessel. Quenching distance of syngas–air mixtures decreases with the heat flux increase, which is consistent with earlier studies. This model could be very useful in predicting the physical conditions of quenching especially for estimation of the quenching distance where the measurement is not possible such as in engines. However, the estimation given should be understood as an order of magnitude, because in turbulent conditions the flame–wall interaction results in lower Peclet numbers than in the laminar case.

Suggested Citation

  • Monteiro, Eliseu & Rouboa, Abel & Bellenoue, Marc & Boust, Bastien & Sotton, Julien, 2014. "Multi-zone modeling and simulation of syngas combustion under laminar conditions," Applied Energy, Elsevier, vol. 114(C), pages 724-734.
    • Handle: RePEc:eee:appene:v:114:y:2014:i:c:p:724-734
    DOI: 10.1016/j.apenergy.2012.08.027
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261912006009
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2012.08.027?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Komninos, N.P. & Kosmadakis, G.M., 2011. "Heat transfer in HCCI multi-zone modeling: Validation of a new wall heat flux correlation under motoring conditions," Applied Energy, Elsevier, vol. 88(5), pages 1635-1648, May.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Eliseu Monteiro & Sérgio Ferreira, 2022. "Biomass Waste for Energy Production," Energies, MDPI, vol. 15(16), pages 1-5, August.
    2. Hiroshi Enomoto & Ryo Nakagawa, 2023. "Reduction in CO Emission from Small Reciprocating Engine Operated with Wood Gasifier by Mixture LHV Changing," Energies, MDPI, vol. 16(6), pages 1-14, March.
    3. Askari, Omid & Elia, Mimmo & Ferrari, Matthew & Metghalchi, Hameed, 2017. "Cell formation effects on the burning speeds and flame front area of synthetic gas at high pressures and temperatures," Applied Energy, Elsevier, vol. 189(C), pages 568-577.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ghazimirsaied, Ahmad & Koch, Charles Robert, 2012. "Controlling cyclic combustion timing variations using a symbol-statistics predictive approach in an HCCI engine," Applied Energy, Elsevier, vol. 92(C), pages 133-146.
    2. Kung, Kevin S. & Thengane, Sonal K. & Ghoniem, Ahmed F. & Lim, C. Jim & Cao, Yankai & Sokhansanj, Shahabaddine, 2022. "Start-up, shutdown, and transition timescale analysis in biomass reactor operations," Energy, Elsevier, vol. 248(C).
    3. Hairuddin, A. Aziz & Yusaf, Talal & Wandel, Andrew P., 2014. "A review of hydrogen and natural gas addition in diesel HCCI engines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 32(C), pages 739-761.
    4. Bissoli, M. & Frassoldati, A. & Cuoci, A. & Ranzi, E. & Mehl, M. & Faravelli, T., 2016. "A new predictive multi-zone model for HCCI engine combustion," Applied Energy, Elsevier, vol. 178(C), pages 826-843.
    5. Olmeda, Pablo & Martín, Jaime & Novella, Ricardo & Carreño, Ricardo, 2015. "An adapted heat transfer model for engines with tumble motion," Applied Energy, Elsevier, vol. 158(C), pages 190-202.
    6. Decan, Gilles & Broekaert, Stijn & Lucchini, Tommaso & D’Errico, Gianluca & Vierendeels, Jan & Verhelst, Sebastian, 2018. "Evaluation of wall heat flux calculation methods for CFD simulations of an internal combustion engine under both motored and HCCI operation," Applied Energy, Elsevier, vol. 232(C), pages 451-461.
    7. Tripathi, Abhinav & Zhang, Chen & Sun, Zongxuan, 2018. "A multizone model of the combustion chamber dynamics in a controlled trajectory rapid compression and expansion machine (CT-RCEM)," Applied Energy, Elsevier, vol. 231(C), pages 179-193.
    8. Komninos, N.P. & Rakopoulos, C.D., 2016. "Heat transfer in hcci phenomenological simulation models: A review," Applied Energy, Elsevier, vol. 181(C), pages 179-209.
    9. Komninos, N.P., 2015. "The effect of thermal stratification on HCCI combustion: A numerical investigation," Applied Energy, Elsevier, vol. 139(C), pages 291-302.
    10. Ortiz-Soto, Elliott A. & Lavoie, George A. & Martz, Jason B. & Wooldridge, Margaret S. & Assanis, Dennis N., 2014. "Enhanced heat release analysis for advanced multi-mode combustion engine experiments," Applied Energy, Elsevier, vol. 136(C), pages 465-479.
    11. Singh, Akhilendra Pratap & Agarwal, Avinash Kumar, 2012. "Combustion characteristics of diesel HCCI engine: An experimental investigation using external mixture formation technique," Applied Energy, Elsevier, vol. 99(C), pages 116-125.
    12. De Bellis, Vincenzo & Malfi, Enrica & Lanotte, Alfredo & Fasulo, Giovanni & Bozza, Fabio & Cafari, Alberto & Caputo, Gennaro & Hyvönen, Jari, 2022. "Development of a phenomenological model for the description of RCCI combustion in a dual-fuel marine internal combustion engine," Applied Energy, Elsevier, vol. 325(C).
    13. Viggiano, Annarita & Magi, Vinicio, 2012. "A comprehensive investigation on the emissions of ethanol HCCI engines," Applied Energy, Elsevier, vol. 93(C), pages 277-287.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:114:y:2014:i:c:p:724-734. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.